PTP 820G Trunk MP Service Point

How to configure ptp 820g trunk port on multi point services?

my running config is SAP Bundle-C, but it's must attach vlan one by one.

site A                                                                                              site B

Gbe1,GBe5, Radio1<===========trunk==============>Gbe1,Gbe5,Radio1

Thank's

use bundle-c sap on the ethernet port and use s-tag snp on the radio port. yes, you need to attach the vlans one by one.

I want to configure trunk without attach vlan

If you want to configure without attachning vlan, you can use SAP All-2-one.