BLOCK certain subscriber module

Mohamed_Said · July 5, 2018, 11:35am

Hello,

could i block a certain subscriber module from connecting to access point

by adding it in a block list or any similar technique !

Regards,

Ryan_Ray · July 5, 2018, 6:37pm

Set a new authentication key on the AP and don't add it to the SM you want to have "blocked"

Seth_Poche · July 6, 2018, 5:58pm

Also you could use RADIUS as your authentication server.

Mohamed_Said · July 8, 2018, 2:55pm

in this case, i have to re define the new authentication key on other subscribers registred to the same AP !

Chitrang · July 9, 2018, 3:26am

Hi,

Do you use radius? If yes there are ways to block SM using Calling-Station-Id.

Luis_Mondragon · July 9, 2018, 3:22pm

Mohamed

Are you trying to prevent the Subscriber from reaching the Internet (suspension) or are you trying to keep the SM from registering to the AP (rogue SM)? For the former, set an unroutable WAN IP - you can still reach the SM via the AP. The latter, no standalone way that I know of and apparently neither does anyone else. Color code is a step, but not foolproof.

Hope this helps some.