CNUT 4.11.2

Cambium is addressing several open CNUT issues. Can you let us know which model AP and SMs are being used and the software builds you're at and upgrading to?

5.4/5.7GHz MIMO OFDM - Subscriber Module

Upgrading from 15.1 too 15.1.3.  Using CNUT 4.11.4 and it hangs each time.  The SM is out of box, no config.  Upgrading before config while its on 169.254.1.1.

1 Like

Update completed, failed to reboot device. Retrying with HTTP request... (SNMPIOException : Failed to get device SNMP response.,Error Code:21-Not Writable) (SITE= No Site Name)

Does that mean anything?  Regardless to what it says above the device was rebooted and firmware updated.

1 Like

===> 5.4/5.7GHz MIMO OFDM - Subscriber Module

I assume a PMP 450 SM?

Confirm PMP 450 SM

Hi hci and Telemar,

Was able to reproduce the issue you're encountering. All test results/errors have been conveyed to the CNUT group for resolution.

Best regards, NSJS

2 Likes

Does anyone know of latest version of CNUT that does not have this issue?  Very annoying.

This issue will be fixed in upcoming CNUT Release 4.12.

We are planning on releasing it in a month or so.

1 Like

definitely a relief that it's not something I did lol.  having the same issue with my ptp450i through cnut.  patiently awaiting next release i guess.

Cheers.

B

Any chance on fixing this CNUT issue too?

https://community.cambiumnetworks.com/t5/PMP-450/PMP450-AP-not-updating-with-CNUT/td-p/73381/page/2

Just encountered it again.

Any idea when we will see the new CNUT with this fix?

Bump

We are planning on releasing CNUT 4.12 in next couple of weeks.

We apologize for the delay and inconvenience it may have caused.

Any update on when we can expect the next CNUT release please?

This issue is VERY very frustrating!

BUMP! Any update on this please?

We are very close to releasing CNUT 4.12. Probably, within a week.

Thanks for your patience.

1 Like

Is there any updates on this issue.... I have many AP and SM to update and the issue is very disruptive. I have 1000's of units to upgrade.

We found an issue at the last minute. We fixed it this week and we are currently testing the final version.

We will be releasing in few days. Apologize for the inconvenience.

If you would like to try a BETA version, please PM me.

Dear Cambium Team

I have the same similar problem on a PTP450 radio SM unit "Error Code:21-Not Writable "

I need help to upgrade the SM although the AP has been upgraded successfully

Hi KOwopetu123,

I have not seen this error before and so far am not able to reproduce the problem. Can you please send me the engineering.cgi files for both the master and the slave as well as the CNUT logs?

My email is joseph.cralli@cambiumnetworks.com

Thanks,
Joe