Showing results for 
Search instead for 
Do you mean 
Reply
Highlighted
New Contributor
Posts: 2
Registered: ‎08-10-2015
Accepted Solution

PMP 450i 3.5 Ghz

Hi, I'm trying to update a PMP450i 3.5 from 14.3 AP-none to 15.0.3 I.m using the most recent CNU 4.10.5 and the program said INVALID FILE IMAGE (STATUS 211) also I tried whit 15.0.1 and 15.0.0.1 and don't t work either please help me to upgrade this AP Thank you
Moderator
Posts: 18
Registered: ‎05-02-2014

Re: PMP 450i 3.5 Ghz

Hello Avalderrama,

 

15.0.3 is not supported for 3 GHz 450i hardware. First software supported for 3 GHz 450i will be 15.1. 

15.1 Beta build is available to download if you are enrolled in the Beta program. 

 

We will be also releasing official 15.1 by end of this week. We apologise for the confusion. 

 

Thanks

Dhaval

Occasional Contributor
Posts: 9
Registered: ‎10-03-2016

Re: PMP 450i 3.5 Ghz

how have you found the performance of the 450i? is it on par with the  PMP450?

Super Contributor
Posts: 296
Registered: ‎10-11-2013

Re: PMP 450i 3.5 Ghz

The 450i has a much faster processor. The RF performance is also a step ahead of the original 450 AP due to the 450i's Rx filter and I would also guess that the Tx is a bit cleaner and more stable. That's exactly what the "i" means... improved.

Valued Contributor
Posts: 1,001
Registered: ‎01-05-2014

Re: PMP 450i 3.5 Ghz

[ Edited ]

George Skorup wrote:

The 450i has a much faster processor. The RF performance is also a step ahead of the original 450 AP due to the 450i's Rx filter and I would also guess that the Tx is a bit cleaner and more stable. That's exactly what the "i" means... improved.


While it does have a faster processor that translates to higher PPS, and being able to push more mbps at larger channels widths then the orignal 450... it doesn't have the filtering incorporated like the 5GHz PMP450i. In real world performance testing I've only seen about 1dB gain/iimprovement over the original 450.

 

So unless you're planning on using larger channel widths then 20MHz... the 3.65 PMP450i is really no better then the original PMP450. There may be some CBRS benefits to using the new PMP450i AP... but that remains to be seen.

 

PS... also... the "I' stands for 'Industrial' :-)

Occasional Contributor
Posts: 9
Registered: ‎10-03-2016

Re: PMP 450i 3.5 Ghz

that's a shame the last webinar i watched said it was 3 dbm.

 

Have you had any of the PMP450's fail? we have had 3 fail in the last 2 months due to water damage and they have only been on the towers for 2 years. It looks to be caused by the poor location of the bottom seam being right on a drip edge and causing a ice buildup in the seal. I have pictures of where you can see where the water has come through. We are replacing going to replace some of AP's with a 450i before  the next winter on the towers that are in the area's of high ice buildup.

New Contributor
Posts: 3
Registered: ‎12-29-2013

Re: PMP 450i 3.5 Ghz - Issue going to 15.1 release

FYI - 

Just tried to update a 450i  3.65 PMP and it kepted rebooting every 15 to 20 secs. These units shipped with a special version 14.3. At least the recorvery mode worked to get back to 14.3. log below and have case open with support.

 

3.6GHz MIMO OFDM - Access Point (PMP 450i  3.65 connectorized Unit)

SYSTEM EVENT LOG
05/08/2017 : 21:42:21 CST : :user=admin; *System Log Cleared*;
05/12/2017 : 02:13:03 CST : :SNTP recfrom error errno 22, PktLen 0
05/12/2017 : 21:58:23 CST : :Web user; user=root; Reboot from Webpage;
05/12/2017 : 21:58:30 CST : :Forced reset;
05/12/2017 : 21:58:40 CST :
******SYSTEM STARTUP******
System Reset Exception -- User Initiated Reset
Software Version : CANOPY 15.1 AP-DES
Board Type : P13
Device Setting : 3.6GHz MIMO OFDM - Access Point - 0a-00-3e-45-13-31 - 3657.500 MHz - 15.0 MHz - 1/16 - CC 49 - 2.5 ms - North America/United States
FPGA Version : 041417
FPGA Features : DES, Sched, US/ETSI;
05/12/2017 : 21:58:46 CST : :Data Abort exception, return PC:04427418 DFSR:(0000000d) -,FS:5 DFAR:00000040
05/12/2017 : 21:58:46 CST : :FatalError()
Stack Dump information:
Current context Interrupt active, Task:BDQT
Current Stack: 1%
Max Stack: 12%
r0 : 00000000 r1 : 04593dd0 r2 : 046b2afc r3 : 00000000
r4 : 0000000d r5 : 04427418 r6 : 00000000 r7 : 00000000
r8 : 0d0ae800 r9 : 0d0ae806 r10: 04427254 r11: 046b2c24
r12: 046b2ab0 r13: 046b2bd0 r14: 04004518 r15: 04011810
CPSR: (0x60070397) - CC:ZC GE:0x0007 BE ITState:0x00 Mask:AI Mode:Abort InstSet:ARM
Interrupt Stack Dump:
0x046b2a88: (PrintStackDump)0x00000002
0x046b2bb8: (FatalErrorLog )0x000000ee
Stack:
0x46b2bd8: 0000000d 04570084 04570084 04570084 04570084 00000005 00000040 00000040
0x46b2bf8: 04427418 00000004 00000000 00000000 00000040 0000000d 00000000 046b2c40
0x46b2c18: 05050505 046b2c28 04011518 04004040 00000000 00000000 0d0ae800 0d0ae806
0x46b2c38: 04427254 05050505 06060606 07070707 08080808 09090909 10101010 04a4fc54
0x46b2c58: 04a4fb70 04427418 00000000 00000000 00000000 00000000 00000000 00000000
0x46b2c78: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x46b2c98: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x46b2cb8: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace:
PC:04004528 SP:046b2bd8 FP:046b2bd4
PC:04011518 SP:046b2c28 FP:046b2c24
PC:00000000 SP:00000000 FP:05050505
Task Stack Dump:
Stack:
0x4a4fb58: 40000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fb78: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fb98: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fbb8: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fbd8: 00000000 40000000 600f0213 00000000 00000000 0d0ae800 0d0ae806 04427254
0x4a4fbf8: 05050505 06060606 07070707 08080808 09090909 10101010 04a4fc54 04a4fb70
0x4a4fc18: 04114b8c 04427418 00000000 0000002e 0d0ae80e 00000800 04a4fcd4 04a4fc40
0x4a4fc38: 0d0ae800 344745fa 00000001 00000001 04a4fcbc 04a4fc58 040a1df0 04427260
Call Trace:
PC:04427418 SP:04a4fb58 FP:04a4fc54
PC:040a3548 SP:04a4fcc0 FP:04a4fcbc
PC:040a3724 SP:04a4fd48 FP:04a4fd44
PC:040a4d90 SP:04a4fd68 FP:04a4fd64
PC:040a5dc0 SP:04a4fda0 FP:04a4fd9c
PC:040a6a2c SP:04a4ff08 FP:04a4ff04
PC:0400e36c SP:04a4ff18 FP:04a4ff14
05/12/2017 : 21:58:56 CST :
******SYSTEM STARTUP******
System Reset Exception -- Reset due to FatalError
Software Version : CANOPY 15.1 AP-DES
Board Type : P13
Device Setting : 3.6GHz MIMO OFDM - Access Point - 0a-00-3e-45-13-31 - 3657.500 MHz - 15.0 MHz - 1/16 - CC 49 - 2.5 ms - North America/United States
FPGA Version : 041417
FPGA Features : DES, Sched, US/ETSI;
05/12/2017 : 21:59:03 CST : :Data Abort exception, return PC:04427418 DFSR:(0000000d) -,FS:5 DFAR:00000040
05/12/2017 : 21:59:03 CST : :FatalError()
Stack Dump information:
Current context Interrupt active, Task:BDQT
Current Stack: 1%
Max Stack: 12%
r0 : 00000000 r1 : 04593dd0 r2 : 046b2afc r3 : 00000000
r4 : 0000000d r5 : 04427418 r6 : 00000000 r7 : 00000000
r8 : 0d0ad000 r9 : 0d0ad006 r10: 04427254 r11: 046b2c24
r12: 046b2ab0 r13: 046b2bd0 r14: 04004518 r15: 04011810
CPSR: (0x60070397) - CC:ZC GE:0x0007 BE ITState:0x00 Mask:AI Mode:Abort InstSet:ARM
Interrupt Stack Dump:
0x046b2a88: (PrintStackDump)0x00000002
0x046b2bb8: (FatalErrorLog )0x000000ee
Stack:
0x46b2bd8: 0000000d 04570084 04570084 04570084 04570084 00000005 00000040 00000040
0x46b2bf8: 04427418 00000004 00000000 00000000 00000040 0000000d 00000000 046b2c40
0x46b2c18: 05050505 046b2c28 04011518 04004040 00000000 00000000 0d0ad000 0d0ad006
0x46b2c38: 04427254 05050505 06060606 07070707 08080808 09090909 10101010 04a4fc54
0x46b2c58: 04a4fb70 04427418 00000000 00000000 00000000 00000000 00000000 00000000
0x46b2c78: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x46b2c98: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x46b2cb8: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
Call Trace:
PC:04004528 SP:046b2bd8 FP:046b2bd4
PC:04011518 SP:046b2c28 FP:046b2c24
PC:00000000 SP:00000000 FP:05050505
Task Stack Dump:
Stack:
0x4a4fb58: 40000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fb78: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fb98: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fbb8: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
0x4a4fbd8: 00000000 40000000 600f0213 00000000 00000000 0d0ad000 0d0ad006 04427254
0x4a4fbf8: 05050505 06060606 07070707 08080808 09090909 10101010 04a4fc54 04a4fb70
0x4a4fc18: 04114b8c 04427418 00000000 0000002e 0d0ad00e 00000800 04a4fcd4 04a4fc40
0x4a4fc38: 0d0ad000 344745fa 00000001 00000001 04a4fcbc 04a4fc58 040a1df0 04427260
Call Trace:
PC:04427418 SP:04a4fb58 FP:04a4fc54
PC:040a3548 SP:04a4fcc0 FP:04a4fcbc
PC:040a3724 SP:04a4fd48 FP:04a4fd44
PC:040a4d90 SP:04a4fd68 FP:04a4fd64
PC:040a5dc0 SP:04a4fda0 FP:04a4fd9c
PC:040a6a2c SP:04a4ff08 FP:04a4ff04
PC:0400e36c SP:04a4ff18 FP:04a4ff14
05/12/2017 : 21:59:13 CST :
*
* Kepted repeating above till recovery below
*
******SYSTEM STARTUP******
System Reset Exception -- Power-On Reset
Software Version : CANOPY 14.3 AP-DES
Board Type : P13
Device Setting : 3.6GHz MIMO OFDM - Access Point - 0a-00-3e-45-13-31 - 3657.500 MHz - 15.0 MHz - 1/16 - CC 49 - 2.5 ms - North America/United States
FPGA Version : 101716
FPGA Features : DES, Sched, US/ETSI;
05/12/2017 : 23:09:49 CST : :Time Set
05/12/2017 : 23:10:00 CST : :Board Temperature: 11 C / 51 F
05/12/2017 : 23:10:04 CST : Acquired sync pulse from Timing Port/UGPS
05/12/2017 : 23:10:04 CST : :GPS Date/Time Set;

Moderator Al
Moderator
Posts: 12
Registered: ‎11-25-2015

Re: PMP 450i 3.5 Ghz - Issue going to 15.1 release

[ Edited ]

Robert,

 

I believe you've been in contact with customer support, so you probably already know what caused your issue.  Just so anyone else reading this thread is up to date, we have found an issue where 450i or 450m radios would experience a stack dump and reboot when either of the following features is enabled, and packets to be filtered reach the radio:

 

1) IP Access Filtering

2) Ethernet Access Filtering (Ethernet Link disabled under General Settings)

 

In both cases, a filtered packet is what leads to the crash you were seeing. We will be updating the 15.1 release page to indicate this. Just to clarify, this is not limited to 3GHz radios, and would be present on all 450i and 450m hardware.

 

The issue has already been fixed and should be available in the upcoming 15.1.1 release and later.

 

Thanks for pointing this one out to us, and we apologize for any problems it caused.

 

-Al

New Contributor
Posts: 3
Registered: ‎12-29-2013

Re: PMP 450i 3.5 Ghz - Issue going to 15.1 release

Thanks Al

Been working through it with Dhaval and support. Let me know if you need me to test out the new release.

Regards

Robert

Contributor
Posts: 76
Registered: ‎08-06-2015

Re: PMP 450i 3.5 Ghz - Issue going to 15.1 release

[ Edited ]

Yesterday we have activate a new PMP 450i and upgraded with 15.1 with no SM's connected.

 

At the first SM (with 14.2.1 installed) connected the AP reboot with a Reset due Fatal Error message in the event log.

Every time the SM connect to the AP, it reboot with the same error.

We have disable the installation color code, downgraded to the 14.2.1 and no more issues...

 

I think is the same Robert's problem because we use the Ethernet Access Filtering on the AP