Set Vlan Priority via snmp

Products PMP
1

Hi,

I can't figure out how to set a Vlanpriority remark via snmp.
Setting by hand I got:


# snmpwalk -v2c -c Canopy 192.168.100.100 whispVLANRemarkTable
WHISP-BOX-MIBV2-MIB::sourceVID.1 = INTEGER: 10
WHISP-BOX-MIBV2-MIB::remarkVIDState.1 = STRING: Disabled
WHISP-BOX-MIBV2-MIB::remarkVID.1 = INTEGER: 0
WHISP-BOX-MIBV2-MIB::remarkPriorityState.1 = STRING: Enabled
WHISP-BOX-MIBV2-MIB::remarkPriority.1 = INTEGER: 7


# snmpwalk -v2c -c Canopy 192.168.100.100 whispVLANRemarkEntry
WHISP-BOX-MIBV2-MIB::sourceVID.1 = INTEGER: 10
WHISP-BOX-MIBV2-MIB::remarkVIDState.1 = STRING: Disabled
WHISP-BOX-MIBV2-MIB::remarkVID.1 = INTEGER: 0
WHISP-BOX-MIBV2-MIB::remarkPriorityState.1 = STRING: Enabled
WHISP-BOX-MIBV2-MIB::remarkPriority.1 = INTEGER: 7

Is it possible to use snmp to SET these values (6k device, should be quicker ;) ).

Thank you

2

We are looking into this... should report back on our findings soon.

Thanks.

3

Hi ,

Following are the OIDs you need.

OID for Source VID

remarkSrcVid - .1.3.6.1.4.1.161.19.3.3.2.244.0

OID for Remark Priority
addRemarkPriority - .1.3.6.1.4.1.161.19.3.3.2.246.0

-Balaji

2 Likes
4
@Balaji Grandhi wrote:

Hi ,

Following are the OIDs you need.

OID for Source VID

remarkSrcVid - .1.3.6.1.4.1.161.19.3.3.2.244.0

OID for Remark Priority
addRemarkPriority - .1.3.6.1.4.1.161.19.3.3.2.246.0

-Balaji

Thank you! That's exactly what I was looking for.

Perfect.