Video Surveillance Configuration for PMP 450

Products PMP
1

Access Point Configurations:

- SM Isolation (Enabled Option 2 – Forward SM destined packets upstream)

- Downlink Data % (15%)

- QoS settings:

-  AP Bandwidth Settings

  • Max Burst Uplink Data Rate (100000 kbps - Maximum)
  • Sustained Uplink Data Rate (100000 kbps - Maximum)
  • Uplink Burst Allocation (2500000 kbps - Maximum)

- Prioritize TCP ACK (Enabled)

- DiffServ Configuration

  • CodePoint Selection (“46” - Video surveillance)
  • Priority Select (“6” – Video surveillance)

- Packet Filter Types:

  • IPv4 Multicast (Enable)
  • Filter Direction (Downlink)

Remote Module Configurations:

- Large VC Data Q (Enabled)

- QoS settings:

- MIR Bandwidth Settings

  • Sustained Uplink Data Rate (100000 kbps - Maximum)
  • Uplink Burst Allocation (2500000 kbps - Maximum)
  • Max Burst Uplink Data Rate (100000 kbps - Maximum)
  • Enable Broadcast / Multicast Data Rate (Disabled)

- Priority Settings:

  • Low Priority Uplink CIR (0 kbps)
  • Hi Priority Channel (Enabled)
  • Hi Priority Uplink CIR (0 kbps)
  • Prioritize TCP ACK (Enabled)

- DiffServ Configuration

  • CodePoint Seletion (“46”- video surveillance)
  • Priority Select (“6” – video surveillance)
5 Likes