Добрый день, зафиксированы проблемы с оборудованием Cambium ePMP1000. Настроена как базовая станция, к ней подключается порядка 56 абонентских терминалов. При появлении загрузки в 50мб/сек, часть абонентских терминалов становится недоступна по системе мониторинга. При чем на базовой станции, абонентские терминалы видны, но они с нее так же недоступны. У абонентов в этот момент наблюдаются проблемы с услугой. До перезагрузки их устройств.
First off I believe this is English only. If you speak English it would be super helpful.
Second, I think you're saying you have 56 users connected and they have problems. If you're using 20 MHz channels you might want to go to 40 MHz if you can. Another major concern would be the performance - can you share the Monitor > Performance page (specifically the modulation data rates)?
Hello, i'm working at same company as topic starter. I'll try to help.
« you're using 20 MHz channels you might want to go to 40 MHz if you can.» We can't because of laws in our country and permissions to use frequency.
Screenshot of AP Monitor > Performance page. I see that total frame time used is 99.8%. Can we fix it by changing ePMP1000 radiomodule on ePMP2000? Or problem in SM with bad signals?