PTP300/500 ALTERNATIVE POWER SUPPLY UNIT

Products PTP
1

Hi,

We still have many running PTP300/500 models running on the field. Clients are asking with the availability of the supplied PIDU+ unit replacement. 

Is there any alternative power we can use other than the PIDU+ PSU using AC as the mode or source of power.

Regards and more power,

Gerry

1 Like
2

Gerry, the WB3025H is the model number for the spare power supply.  There are limited quantities of these available.

The alternative is to use the AC+DC Power Injector used with the PTP 670.  The model numbers are below.  IMPORTANT NOTE:  This supply is not an exact replacement as it does not have a recovery mode reset switch which is required to place a PTP 300/500/600 into recovery mode.However, it will function properly as a power injector.

C000065L002C AC+DC Enhanced Power Injector 56V
N000065L003A US Line Cord Fig 8
N000065L004A UK Line Cord Fig 8
N000065L005A EU Line Cord Fig 8

Regards, Bruce

1 Like
3

Thanks Bruce!

4

Hi Bruce,

Can you confirm also that PTP650 AC+DC injector can also be use as an alternative PSU for PTP300/500, instead of using PTP670 PSU.

Thank you for the usual support!

Regards,

Gerry

5

Hi Gerry, the PTP 650 and PTP 670 both use that same AC+DC Power Injector model listed earlier in this thread.

So any of those will work (Rev A, B, or C) with a PTP 500 or 600 keeping in mind the earlier caveat that the AC+DC Power Injectors do not have the factory recovery reset switch.

- Bruce

6

Hi Bruce,

On the other hand, can we use PTP300/500/600 PIDU Plus to replace PTP650/670 AC+DC supply as well? You find this question not relevant, but, it is true we have a client owning PIDU Plus units and in need to replace their AC only (PTP650 PSU) as it fails for some time using PIDU Plus instead.

Thanks again,

Gerry

7

Hi Gerry,

this isn't a recommended or officially supported configuration but will likely work.  Do not do this with a device being powered from the PTP 650 AUX port.  Also, in this configuration the factory recover switch won't work and might be mis-leading to the next person looking at the installation or the PIDU Plus.

Regards, Bruce