PTP650 - Single E1

Products PTP
1

Hi all,

Can I use splitter or any other E1/Ethernet Mux with PTP650 single E1 licensed ??

2

Hi,

When you say "splitter" were you thinking about the wiring adaptor that we used with PTP 500?

Mark

3

Hi Mark,

Yes, the one used with PTP300/500/600.

4

Hi Mark,

Any good news ??

5

Hi Mohamed,

Well, lots of good news, but unfortunately no good news about the E1/T1 splitter.

PTP 600 has two E1/T1 interfaces connected through a single dedicated RJ-45 connector. PTP 500 has one E1/T1 interface that shares an RJ-45 with the 100BASE-TX Ethernet connection. These two solutions need splitters, which you can purchase or make up yourself.

PTP 650/670/700 do not have anyE1/T1  interfaces internal to the ODU. Instead, we provide up to eight E1/T1 ports on the NIDU. The NIDU provides a great solution in a network that needs multiple (up to eight) TDM circuits.

Unfortunately, you will still need a NIDU even if you need only one E1/T1.

Mark

6

Hi Mark,

Thanks for your support.