¿que debo hacer cuando un equipo morotola me da red lan pero no puedo ingresar a la configuracion del equipo, ya lo he reseteado varias veces para ingresar por la direccion ip 169.254.1.2 y tambien por la direccion 169.254.1.1 y no he podido acceder, que debo hacer para poder tener acceso a la configuracion, o si definitavamente debo dar de baja el equipo motorola ptp?
Hi
If you are having problems accessing the IP address, ensure that the unit is using its default IP address by booting the unit into “Recovery” mode. For PTP300/500/600 you can boot into recovery by pressing the reset button on teh PIDU. For PTP650 reboot into recovery by a short power cycle.
Make sure that your PC is also configured onto the same network.
If you need further support, please call our helpdesk - They speak English, Spanish and Portuguese!
http://www.cambiumnetworks.com/support/contact-support
Regards
Julian
que otro metodo aparte de presionar el boton de la pidu plus existe para reset motorola ptp 300/500/600?
Leonardo, para entrar en recovery mode debes encender el radio con el boton de recovery apretado. Esperas 20 seg y soltas. Ahi recien entras via web a la 169.254.1.1
Saludos
pls help me
how can motorola ap 7131 factory reset
Hi,
The AP7131 formed part of the Motorola Enterprise Wireless portfolio. This portfolio has never been a part of Cambium Networks.
Brocade/Extreme Networks and previously Zebra support this product.
Perhaps the following link may help. However, the correct CLI syntax may depend on the firmware/Wing version you are running.
http://blog.remembertheview.com/2014/05/16/reset-motorolabrocade-7131-ap/
AP7131 Support: