Hi, i have in our antenna enabled in the configuration "Default alternative LAN1 IP address", so i can enter in the SM when it's registered.
The problem is that the App CNArcher see the SM until remains disconnected from the repeater.
When the SM it's connected, CNArcher doesn't see the SM but, if i open Chrome in the Smartphone, i can enter in the GUI.
I use GEVA Elettronica bridge.
If i connect a PC directly to SM, i can enter in the GUI, with default alternative LAN1 IP address enabled, ever.
CNArcher loses the SM when it's connected.
Solved! Go to Solution.
This is a known issue that is being looked at. The problem is that even though GUI access to 169.254.1.1 works, SNMP to the same IP will not work. And the app uses SNMP. You will see this issue when VLAN configuration is enabled and the SM is connected to the AP.
Please see http://community.cambiumnetworks.com/t5/cnArcher/cnArcher-Quick-Start-Guide/m-p/81997#M35 for instructions on installing and using the app.
it is still expected that my problem will be resolved in the next PMP version 15.2?
Without this feature fixed required (think used by many) is stopped our CNArcher project.