Performance page
Period: ANY
Interval: ANY
Device Type: PMP AP and/or SM
Data Export:
Problem -
Selecting or deselecting the Basic checkbox has no effect on the underlying fields. No way to toggle a field.
Once the report is generated, neither the Uplink RSSI nor the Uplink RSSI Imbalance fields populate.
With the new release, not only were five fields added (good), but the layout changed (not so good).
Request -
When exporting a combined AP and SM report, change arrangement of fields as follows:
Move Network (New) before Tower (New)
Move Uplink RSSI (dBm) (New) after Uplink RSSIImbalance (New) - Add a space betwwen RSSI and Imbalance
Move Downlink ThroughPut (Kbps) before Uplink ThroughPut (Kbps)
Move Downlink Modulation before Uplink Modulation
Move Downlink Frame Utilization before Uplink Frame Utilization
Move Offline Count (New) after Session Drops
Move Downlink RSSI (dBm) after Uplink Frame Utilization
Move Downlink RSSIImbalance after Downlink RSSI (dBm)
| Polling Timestamp | Network | Tower | MAC | Device Name |
| Device Type | Device Mode | Downlink ThroughPut (Kbps) | Uplink ThroughPut (Kbps) |
| SM Count | Session Drops | Offline Count | Downlink Frame Utilization | Uplink Frame Utilization |
| Downlink RSSI (dBm) | Downlink RSSIImbalance | Downlink Modulation |
| Uplink Modulation | Uplink RSSI Imbalance | Uplink RSSI (dBm) |
Rearrange the fields of the individual AP and SM exports accordingly.
Thanks