HI
I have to enter an SSH command from the E500 console.
So I wrote my little script and I have to run it from the E500 SSH console.
I have no problem connecting SSH to the E500
My order to disconnect a client from the radius server, which can only be sent from the NAS.
echo "User-Name=MAC-DEVICE,Framed-IP-Address=IP-DEVICE" | radclient -x IP_SERVER:PORT_SERVER disconnect mypassword
WHAT command I need to enter to be able to run my command line request from the E500
If I type it directly without selecting a field in the SSH console I get the following error:
%Error processing cli command
Regards
Francesco
firefly
(firefly (inactive))
2
@VODAFONE_PF wrote:
HI
I have to enter an SSH command from the E500 console.
So I wrote my little script and I have to run it from the E500 SSH console.
I have no problem connecting SSH to the E500
My order to disconnect a client from the radius server, which can only be sent from the NAS.
echo "User-Name=MAC-DEVICE,Framed-IP-Address=IP-DEVICE" | radclient -x IP_SERVER:PORT_SERVER disconnect mypassword
WHAT command I need to enter to be able to run my command line request from the E500
If I type it directly without selecting a field in the SSH console I get the following error:
%Error processing cli command
Regards
Francesco
please try 'no wireless client AA-BB-CC-DD-EE-FF' from the SSH console (where AA-BB-CC-DD-EE-FF is the MAC address of the client)
Thank you for your quick answer.
Before testing, I want to clarify, that I do not want to remove the client from wifi, but my intention is to restart it in the radius.
Since the instruction must come from the NAS(E500) I would like to cut it off and reconnect it immediately.
This operation should close his session on my RADIUS and open a new one immediately.
Can you also tell me how to reconnect the client immediately afterwards.
thank you
Hi
Thank you I just tested the order and it's exactly what I needed.
Regards