Telemar
(Telemar)
December 14, 2017, 9:55am
1
We started using some E410 AP's and seems that many of them reset automatically.
I explain:
I configure the AP
it's working
I reboot AP
It's working
I turn off AP
After 1-2 days i connect AP and seems to be reset
There's no static IP and is pingable only the default IP 192.168.0.1.
This happen to various AP correctly configured.
And happen even to AP configured, resetted automatically and configured again...
I think is a version problem (3.4.3.5-r2)
I did'nt tried with older version
Telemar
(Telemar)
January 2, 2018, 2:21pm
3
When happen the devices are not connected to cnMaestro (on-premises).
I don't know if happens with the devices onboarded.
Thanks for your feedback
elia
(elia)
February 16, 2021, 8:23am
4
hi it’s happen to me too in about 4 installations.
all have e410 and 1 by 1 i found it reset.
version was 4.1
now i try to upgrade and see what happen.
e600 and e700 in the same buildings are good.
mixig
(mixig)
February 16, 2021, 9:04am
5
Bug on 3.4.x firmware… upgrade resolved that issues, been there, done that
1 Like