I haven't seen too many posts regarding the epmp 2000 performance. Anyone have any real world experience they can share regarding the epmp 2000?
BS ePMP 1000 with sector antenna 15 dBi was replaced by ePMP2000 Sector antenna for ePMP 2000 ( gain 18 dBi) and Smart Antenna with Beamforming.
Tx =23 dBm, frequency 5320 MHz, bandwidth channel 40 MHz, TDD DL/UL- Flexible. Firmware v.3.0.1.
CPE 99-105 q-ty, ePMP intergated, Force 180, distance to BS up to 4 km, LOS.
Cliens have 10/20Mbps service plan.
Screenshots-
- BS Monitor-Wireless
-Cacti daily traffic load ( max sector 40 MHz airtime load up to 79 Mbps at the weekend)
- CPE latency ( 64/1500 bytes ping) -avegare 53/63 ms ( max sector load at the weekend)
- ePMP Link test from worst CPE ( RSSI, modulation) at weekend
- OOKLA speedtest.com from worst CPE ( RSSI, modulation) at weekend , 8 Mbps TCP test (OOKLA) .
Replacement BS to ePMP 2000 ( with new sector 18 dBi antenna and smart antenna) improved by 3-4 dBi uplink/downlink RSSI, increase upload throughput in twice, total sector traffic load +10-15%.
BS ePMP 1000 with sector antenna 15 dBi was replaced by ePMP2000 Sector antenna for ePMP 2000 ( gain 18 dBi) and Smart Antenna with Beamforming.
Tx =23 dBm, frequency 5320 MHz, bandwidth channel 40 MHz, TDD DL/UL- Flexible. Firmware v.3.0.1.
CPE 99-105 q-ty, ePMP intergated, Force 180, distance to BS up to 4 km, LOS.
Cliens have 10/20Mbps service plan.
Screenshots-
- BS Monitor-Wireless
-Cacti daily traffic load ( max sector 40 MHz airtime load up to 79 Mbps at the weekend)
- CPE latency ( 64/1500 bytes ping) -avegare 53/63 ms ( max sector load at the weekend)
- ePMP Link test from worst CPE ( RSSI, modulation) at weekend
- OOKLA speedtest.com from worst CPE ( RSSI, modulation) at weekend , 8 Mbps TCP test (OOKLA) .
Replacement BS to ePMP 2000 ( with new sector 18 dBi antenna and smart antenna) improved by 3-4 dBi uplink/downlink RSSI, increase upload throughput in twice, total sector traffic load +10-15%.
ePMP 1000 with 15 dBi sector antenna was replaced by ePMP 2000 with new 18 dBi sector antenna and Smart Beamforming antenna
Tx 23 dBm, Frequency 5 320 MHz, bandwidth channel 40 MHz, TDD DL/UL- Flexible. Firmware v.3.0.1.
CPE 99-105 q-ty, ePMP intergated, Force 180, distance to BS up to 4 km, LOS.
Cliens have 10/20 Mbps service plan.
Screens:
Clients
-Cacti daily traffic load ( max sector 40 MHz sector load up to 80 Mbps)
- CPE latency ( 64/1500 bytes ping) - ( max sector load at the weekend)
- ePMP Link test from worst CPE ( RSSI, modulation) at weekend
- OOKLA speedtest.com from worst CPE ( RSSI, modulation) at weekend .
Replacement ePMP 1000 by ePMP 2000 increased UL/DL RSSI by 2-4 dBi, Upload throughput in twice, total sector traffic load +10-%
2 Likes
ePMP 2000 bandwidth channel 20 MHz, TDD DL/UL- Flexible. Firmware v.3.0.1.
CPE 99-105 q-ty, ePMP intergated, Force 180, distance to BS up to 4 km, LOS.
Cliens have 5/10 Mbps service plan.
-Cacti daily traffic load ( max sector 20 MHz airtime load up to 63 Mbps)
- CPE latency ( 64/1500 bytes ping) -average 47/49 ms ( max sector load at the weekend)
- ePMP Link test from worst CPE ( RSSI, modulation) at weekend
- OOKLA speedtest.com from worst CPE ( RSSI, modulation) at weekend , 5 Mbps TCP test (OOKLA) .
2 Likes
Hello Sir,
I'm Joseph from Nigeria, We just setup cambium Epmp 2000, Can anyone tell me what is the Transmission output power for and what's it effect?
It is power of radio signal, that AP transmittes to clients. It is measured in dBm or Watt . 20 dBm is 100 mW. Set this value at AP side 23-27 dBm.