cancel
Showing results for 
Search instead for 
Did you mean: 

Force180 won't boot

SOLVED
Occasional Contributor

Force180 won't boot

Hi.

I have one Force180 with 3.4.1. or with 3.5 (not sure) which won't boot.

SM is connected via PoE adapter and power light is on. Ethernet light never even flashes, there is very small flash for 3. signal light, but barely visible. SM is not reachable via ethernet.

 

Any idea?

 

Thanks

4 REPLIES
Moderator

Re: Force180 won't boot

Hi,

 

In case Ethernet LED doesn't flash at all device can be broken.

You may try to recover FW through u-boot recovery mechanism to exclude possibility of FW crash.

http://community.cambiumnetworks.com/t5/ePMP-Troubleshooting/Recovery-of-flash-corrupted-ePMP-device...

 

Thank you.

Occasional Contributor

Re: Force180 won't boot

I tried over that proccedure but it doesn't work.
I guess RMA is the only option left?

Moderator

Re: Force180 won't boot

Is this a brand new unit out of the box? Or was it working and now not booting anymore?

 

If its the former, then RMA is the only option. 

 

Either ways, contact our support team and they will help with next steps. 

Highlighted
Occasional Contributor

Re: Force180 won't boot

Was working for about  a month, now it doesn't anymore. I will contact support for RMA.

 

Thank you for your help