I can not access the other linked antenna

Products ePMP
1

Hi, how are you?
Detail the situation: Connected from one of the antennas, I can not access the other through the link, I must be by cable (direct to the antenna or through a switch). In this place we have 3 sites connected by 4 antennas ePMP1000 (one in point A, 2 in point B, and 1 in point C). From A, I can not access the linked antenna, but I can access the others (and the same happens in the rest of the points).

As mentioned above, are ePMP1000 devices with firmware 3.2.2

I apologize, I'm from Argentina and I do not speak English well.

regards

2

this is exected secuity behavior.  you can turn that function off so you can get to all of the radios under config >  then management access > change it to both ethernet and wireless.

1 Like
3

http://community.cambiumnetworks.com/t5/Spanish/No-es-posible-acceder-a-epmp1000-modo-ap-desde-el-lado-del/m-p/69905#U69905

Saludos

1 Like
4

Thanks to both, I had overlooked those options. Everything is working properly. Regards!