Can someone provide me a CMM5 parts list for connecting (4) ePMP 2000 & (4) 450i AP's?
Let me know if this is correct...
- (2) C000000L556A - 56V Power & Sync Injector
- (1) C000000L500A - CMM5 Controller
- (1) 600W or 240W power supply?
- Do they come with rack adapters or not?
- (1) 1096H - uGPS module
- Are there any other cables needed for this?
This is one hell of a parts list that we're not used to. We love the LMG CTM2 with is one single device, one part number and one rack unit.
Hi Eric,
Sorry for the delayed reply.
To power/sync (4) ePMP 2000 APs & (4) PMP 450i APs you would need:
- (2) C000000L556A - 56V Power & Sync Injector
- (1) C000000L500A - CMM5 Controller
- (1) 240W power supply
- ePMP 2000 AP has a 20W max draw
- PMP 450i AP has a 25 W max draw, but, if you are using the Aux port PoE, the max draw is 55 W
- So, the 240W power supply should be adequate for your installation
- (1) 1096H - uGPS module
- Do they come with rack adapters or not?
- CMM5 modules do come with the hardware needed for rackmounting
- Are there any other cables needed for this?
- You will also need:
- (8) Cables (8 pin) for connecting the radios to the CMM5 Injector
- (1) cable (6pin) to connect the uGPS to the CMM5 Injector
- Electrical wire for connecting the modules to the power supply
All The Best,
Tyler