ePMP Device Configuration Parameters - Default Values

ePMP Device Configuration Parameters - Default Values

The following tables may be referenced for listings of default configuration values for ePMP device parameters.

Each factory default procedure will return the device to the values listed in the tables below.

AP Ethernet Interface, Configuration Defaults

Attribute

Default Value

IP Assignment

DHCP

IP Address

192.168.0.1 (Default IP Address)

Subnet Mask

255.255.255.0

Management Access

Ethernet

Ethernet MTU

1500 bytes

Port Setting

Auto-Negotiate

VLANs

Disabled

Spanning Tree Protocol

Disabled

SM Traffic Isolation

Disabled

DHCP Option 82

Disabled

LLDP

Enabled(Receive and Transmit)

AP Wireless Interface, Configuration Defaults

Attribute

Default Value

Driver Mode

TDD

Country Code

None / United States / Generic ETSI (ROW / FCC / ETSI device type, respectively)

ROW devices do not transmit with Country Code set to None

Default SSID

Cambium-AP

ACS

Enabled

Channel Bandwidth

20 MHz

Downlink/Uplink Ratio

Flexible

Frame Size

5 ms

Max Range

3 Miles

Max Registrations Allowed

10/120 (Lite Devices / Full Capacity Devices, respectively)

Subscriber Module Receive Level

-60/-55 (ePMP 1000 / ePMP 2000, respectively)

Downlink Max Rage

MCS15

Management Traffic Rate

MCS1

Colocation Mode

Disabled

Synchronization Mode

Disabled

Uplink Antenna Selection

Auto (ePMP 2000 with Smart Antenna only)

AP Security Parameters, Configuration Defaults

Attribute

Default Value

WPA2 Security

Enabled (default value Cam39-Tai!wdmv)

L2/L3 Firewall

Disabled

Wireless MAC Address Filtering

Disabled

SNMPv2

Enabled (with default Community Strings)

Read-Only Community String – public

Read-Write Community String – private

Trap Community String – cambiumtrap

SM Ethernet Interface, Configuration Defaults

Attribute

Default Value

Network Mode

Bridge

IP Assignment

DHCP

IP Address

192.168.0.2 (Default IP Address)

Subnet Mask

255.255.255.0

Ethernet MTU

1500 bytes

Port Setting

Auto-negotiate

Management VLAN

Disabled

Data VLAN

Disabled

Membership VLANs

Disabled

IPv6

Disabled

ARP-NAT

Disabled

Spanning Tree Protocol

Disabled

DHCP Server Below SM

Disabled

LLDP

Enabled (Receive and Transmit)

Ethernet Port Security

Disabled

SM Wireless Interface, Configuration Defaults

Attribute

Default Value

Driver Mode

TDD

Country Code

Follow AP / United States (ROW, ETSI devices / FCC devices, respectively)

Scanning List

All available frequencies selected for 20 MHz and 40 MHz channel bandwidths

Network Entry RSSI Threshold

-90 dBm

Network Entry SNR Threshold

0 dB

Uplink Max Rate

MCS15

Uplink Antenna Selection

Auto (5 GHz SMs only)

Max Tx Power

Auto (Automatic Transmit Power Control and Regulatory-controlled)

SM Security, Configuration Defaults

Attribute

Default Value

RADIUS

Enabled (default EAP-TTLS credentials username:  subscriber1, password: cambium)

WPA2

Enabled (default value Cam39-Tai!wdmv)

L2/L3 Firewall

Disabled

SNMPv2

Enabled (with default Community Strings)

Read-Only Community String – public

Read-Write Community String – private

Trap Community String – cambiumtrap

4 Likes