cancel
Showing results for 
Search instead for 
Did you mean: 

Post Elevate dhcp client mac address problem

Contributor

Post Elevate dhcp client mac address problem

Having upgraded our first nano (Nano M5 running XM-5.6.3) and put it into NAT mode, the unit requests a dhcp lease from MAC 02:FF:FF:FF:FF:FF ( on the 'Separate Wireless Management Interface')

 

 

I will be using PPPoE going forward so I would need the mac of the management interface to be unique...

14 REPLIES
Highlighted
Regular Contributor

Re: Post Elevate dhcp client mac address problem

I've been seeing this happen as well. It seems to only affect some hardware, and as far as I can tell, it's pretty much random - some work perfectly normal, and others will consistently show up as 02:FF:FF:FF:FF:FF (and all get the same IP from the DHCP server, because of that)... I'm assuming it's something specific to that particular piece of hardware. So far, I've only seen it happen on XM hardware, so I'm not sure if XW is affected.

 

Let me know if there's anything I can do to help, as I would like to get this resolved... I could probably even send Cambium an affected radio, if they're having problems reproducing it.

Moderator

Re: Post Elevate dhcp client mac address problem

Hi Barry and Mathew, 

 

Which release are you seeing this on?

 

Thanks

Sriram

Contributor

Re: Post Elevate dhcp client mac address problem

I'm seeing this on 3.2.1

Regular Contributor

Re: Post Elevate dhcp client mac address problem

I am still seeing it on 3.2.1

 

For what it's worth, this happened on every XM radio I elevated with 3.2, but it's only happening on about half of them with 3.2.1 - I'm not sure if that's just a coincidence, of if 3.2.1 partially resolved it... I haven't tried upgrading any with the problem from 3.2 to 3.2.1 to see if that changes anything yet.

Moderator

Re: Post Elevate dhcp client mac address problem

Hi,

 

Sorry for inconveniences.

I would be really appreciate it if you could provide Hardware type of affected devices.

 

Thank you.

Contributor

Re: Post Elevate dhcp client mac address problem

Hi Fedor,

 

Could you clarify please?

 

Do you want eg the the hardware type and manufacturing code?

 

Do you want one of us to send you on a physical unit?

Moderator

Re: Post Elevate dhcp client mac address problem

I am sorry, just meant we need to know hardware type to check described issue.

Thank you.
Regular Contributor

Re: Post Elevate dhcp client mac address problem

I'm seeing it on NanoBridges and at least one NanoStation.

Moderator

Re: Post Elevate dhcp client mac address problem

Thank you.

Issue is under investigation now.

I will keep you updated.

 

Thank you.