Answer: The ePMP units can be upgraded directly from the GUI, under tools --> upgrade. It can also be upgraded via a webserver and pointing to the server and file name. Please note the messages and upgrade times -
During an upgrade process the units will display the following messages in your browser screen. Please also take note of the time duration between each steps
- In the bottom left corner of your browser a file upload status will be displayed – (00:05 sec)
- Once step 1 is complete, the system will display “Initializing Upgrade” (00:13 sec)
- Once step 2 is complete, the system will display “Update is in progress. Uploading firmware to flash (02:00 min)
- Once step 3 is complete, the system will display “Upgrade successfully finished. Waiting for reboot. You must reboot device for the changes to take effect (00:38 sec)
NOTE: Once the upgrade completes and a reboot command is issued, please check the version number. If the version number does not reflect the intended version, perform a second reboot
Please view the following video on how to upgrade your ePMP radio.