ePMP subscriber modules may be powered from a 220 VAC input source using the PoE injector (N000900L002A) included with the ePMP device:
The ePMP power supply N000900L002A conforms to the specifications listed below:
Power supply physical specifications
Category |
Specification |
Dimensions (H x W x D) |
11.8 x 4.4 x 3.2 cm (4.66 x 1.75 x 1.25 in) |
Weight |
0.26 lbs |
Table 47 Power supply environmental specifications
Category |
Specification |
Ambient Operating Temperature |
0° C to +40° C |
Humidity |
20% - 90% |
Power supply electrical specifications
Category |
Specification |
AC Input |
100 to 240 VAC |
Efficiency |
Meets efficiency level ‘V’ |
Over Current Protection |
Zener clamping (38V to 45V) |
Hold up time |
10 ms minimum at maximum load, 120 VAC |