cancel
Showing results for 
Search instead for 
Did you mean: 

EPMP Force 300

New Contributor

EPMP Force 300

Di any one test these devices and if they did at what distance 

 

I tried them at 16km and the kept dropping the link after 10 to 15 minutes.

 

I have not tried the Beta v4.1.1-RC1, I tried them with Beta 4.1-BRC13

4 REPLIES
Occasional Contributor

Re: EPMP Force 300

I have a force 300 up for testing and my AP end will hard reboot 50 to 60 times in 24 hours not happy with it link is 3.5 mile can only get 105 meg down to SM if any one has a fix for the reboot let me know

New Contributor

Re: EPMP Force 300

Try RC11, this firmware solved almost Force 300 all problems.
Now, they are works well if i compare with others versions. The newest version 4.1.1 has many problems, as lost mac table and decrease throughput.


If you need RC11, request me.

 

Regards,

 

Jone

Highlighted
Occasional Contributor

Re: EPMP Force 300

I have the 4.1.1 RC11 on them same thing but now the unit will stay up from 1 day to 6 day then the lan side stops talking the wireless side stays up but the lan side on the AP end goes down and you must reboot the unit to get it back up

New Contributor

Re: EPMP Force 300

Maybe the side can has some assembly problem.

 

Have you tried to replace for other one?

 

Regards,

 

Jone