has anyone else ran into this issue? this has happened a few times over the past couple of hours. the date and time or correct, just needed to wait for the NTP to connect after it rebooted. We do have the licensing for this band and have not had any issues before.
any help would be greatly appreciated. Thanks
******SYSTEM STARTUP******
System Reset Exception -- Power-On Reset
Software Version : CANOPY 16.0.0.1 AP
Software Boot Version : CANOPYBOOT 1.0
Board Type : P14
Board Temperature : 0 C / 32 F
Device Setting : 5.2GHz MU-MIMO OFDM - Access Point - 0a-00-3e-60-3d-be - 5315.0 MHz - 20.0 MHz - 1/16 - CC 194 - 2.5 ms - North America/United States
FPGA Version : 090a76;
12/31/2015 : 19:00:05 CDT : :Unsupported frequency band:0 for frequency adjustment offset.
12/31/2015 : 19:00:27 CDT : Acquired sync pulse from Main/Power Port
We are seeing this as well on some 450M APs. Can anyone from Cambium answer what this message means?
Thanks!
---------------------------
******System Startup****** System Reset Exception -- User Initiated Reset Software Version : CANOPY 16.0.1 AP Software Boot Version : CANOPYBOOT 1.0 Board Type : P14 Board Temperature : 0 C / 32 F Device Setting : 5.1GHz MU-MIMO OFDM - Access Point - 0a-00-3e-60-38-83 - 5200.0 MHz - 20.0 MHz - 1/16 - CC 136 - 2.5 ms - North America/United States FPGA Version : 090a76; 10/21/2019 : 14:41:21 UTC : :Unsupported frequency band:11 for frequency adjustment offset. 10/21/2019 : 14:42:22 UTC : :Time Set 10/21/2019 : 14:42:41 UTC : Acquired sync pulse from Main/Power Port
Unsupported frequency band:11 for frequency adjustment offset.
c-pep1 and rnelson,
This is just a minor software logging bug that is showing up if your 450m is running in the 5.1 or 5.2 GHz frequency band. In actuality, the 450m does not do power adjustment like previous products, so in the end when this is fixed there will be no functional difference. Thanks for letting us know. We've open an issue internally to fix it.