# 4600C Management VLAN

**URL:** <https://community.cambiumnetworks.com/t/4600c-management-vlan/109143>\
**Category:** ePMP\
**Created:** [October 31, 2026, 9:40am UTC](https://community.cambiumnetworks.com/t/4600c-management-vlan/109143 "2026-10-31T09:40:18Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Carl\_Devel](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/c/fbc32d/32.png) [@Carl\_Devel](https://community.cambiumnetworks.com/u/Carl_Devel)\
**Post date:** [October 31, 2026, 9:40am UTC](https://community.cambiumnetworks.com/t/4600c-management-vlan/109143/1 "2026-10-31T09:40:19Z")

</div>

I have 4600C SM connected on my mikrotik.

When I enable management vlan and set to 115 and set dhcp as well, it doesn’t seem to get an ip on my mikrotik router. I enabled wireless and eth management as well.  
Did I miss something?

As per testing, changing my SM to AP mode, it is now able to work on the management vlan.

On my Ubiquiti products, it seems to be just fine.

---

<div class="post-metadata">

**Author:** ![Andrii](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/andrii/32/33514_2.png) [@Andrii](https://community.cambiumnetworks.com/u/Andrii)\
**Post date:** [November 2, 2026, 10:16am UTC](https://community.cambiumnetworks.com/t/4600c-management-vlan/109143/2 "2026-11-02T10:16:55Z")

</div>

Hello @Carl_Devel !

Could you try to enable the option DHCP server below SM?  
Which FW are you using

 ![image](https://d1okf4ta8xniw3.cloudfront.net/original/3X/2/5/2583a7bab4d3ecfecf11d6f71a2051a9527309da.png)

---

<div class="post-metadata">

**Author:** ![Carl\_Devel](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/c/fbc32d/32.png) [@Carl\_Devel](https://community.cambiumnetworks.com/u/Carl_Devel)\
**Post date:** [November 2, 2026, 10:38am UTC](https://community.cambiumnetworks.com/t/4600c-management-vlan/109143/3 "2026-11-02T10:38:30Z")

</div>

Ok. I will try it. Using the latest firmware