Accessing Network behind client end device

Any one let me know how to allow to all network access from client device.

I have installed a Point to Point of ePMP 300-25 from my office to my residence and works good. but problem is that this setup is don’t allow me for access any other cambium device of my network except my residence end device.

please let me know how to allow this.


If you enable management from Both Ethernet and Wireless on the AP you will be able to access it from your residence.
Presumed you have no VLANs (Management etc) you should be able to access also the other endpoints if not check if the client isolation is enabled on the AP or a misconfiguration on the Gateway on the endpoints.