For PTP820, we have antenna available from three different manufacturers:
Commscope - Andrew, 1 to 6ft, 6 - 42GHz, available for NA, CALA, EMEA and APAC
- Radiowave, 1 to 6ft, 6 - 42 GHz, available for NA and CALA
- Xian Putian, 1 to 6ft, 6 - 42 GHz, available for APAC and EMEA
You can find these antenna details performance from the PTPLinkplanner.
We also start add antenna spec under:
where you can download the antenna specifications.
From pervious link, you will be able to find hte specificition of the radio.
From the specification, you shall be able to find the reference P/N from the manufacture.
For Andrew antenna:
1. Find the antenna spec using following link:
2. under documents/tools, you will be able find RPE file for the antenna.
Could you please help me find the technical specifications for part number: N180082D034.
Who is the manufacturer for this antenna?
Is there a specification for antenna with part number: N060082D128
The file allenyu posted is not available any more... Also I can't find antenna smaller than 1,2m on Andrew page for 6GHz band.
EDIT: Just found smaller than 1,2m, but not sure if that's the correct antenna specification for the one I am looking for. Is it possible to publish somewhere all specifications, so we can rather focus on client than searching for specifications? -no hard feelings here.
attached is the spec sheet of the N060082D128A dish. The smallest dish in 6 GHz is a 3' dish so that would be about 0.9m. I'll have to defer to Allen, our PTP820 product manager, on publishing dish specs somewhere. In the meantime if there are other dish specs you're looking for let me know and I can attach them.
Our problem is that for every 'project' - PTP link - we have to send antenna specification, with registration for frequencies. Searching for specifications and losing time with it, doesn't make sense for me.
You can reach out to me direct by email at firstname.lastname@example.org and I can supply the necessary spec sheets as necessary. Let me double check with PLM if I can just send them all to you or if he can publish them somewhere.
Thank you for your help. If they can upload all to Support page, that would be great! In the mean time, if I am going to need additional specifications I will send you e-mail.