AP 2.4 partially hung after some time.. possible leakage?

Hi,

I have a epmp1000 integrated working as an AP (bridged) and CPE authorization is throught Radius.

I have noticed that each day or 2, the SNMP daemon is not responding anymore. When I enter the GUI, everything is empty (all fields on the status page show as - ). I can log in and reboot, then it starts working correctly again until next time.

I can't assure but it seems it started once a CPE is disabled in radius. The CPE keeps reconnecting very quickly few times a minute, something is logged in syslog.

It seems some kind of leakage..... It reminds me Ubiquity which also have some similar behavior: snmp daemon stops, httpd works incorrectly and requires reboot....

Can you please investigate?

Mar 23 17:39:11 ap-x-13g40 hostapd: ath0: STA 00:04:56:c2:aa:66 IEEE 802.11: associated
Mar 23 17:39:12 ap-x-13g40 hostapd: ath0: STA 00:04:56:c2:aa:66 IEEE 802.1X: authentication failed - EAP type: 21 ((null))
Mar 23 17:39:14 ap-x-13g40 kernel: SM[00:04:56:c2:aa:66] aid=4 disassociated. Reason: COMMUNICATION LOST
Mar 23 17:39:14 ap-x-13g40 hostapd: ath0: STA 00:04:56:c2:aa:66 IEEE 802.11: disassociated

Hi roanwifi,

Thanks for the info. We will investigate this. 

Sriram

Hi,

FYI this keeps happing. I'm going to rollback to 2.3.4 in order too see if it gets fixed

Regards

Antonio