When running 7.1.4 on a 5.7 ap’s when doing a link test it, it would only show the uplink rate and not the downlink rate. After going back to 7.0.7 the link test works correctly. I also noticed that the newer software would load much slower than the older software. Sometimes causeing the sm to drop when doing a link test.
Anyone else seen this?
cbotts wrote: When running 7.1.4 on a 5.7 ap's when doing a link test it, it would only show the uplink rate and not the downlink rate. After going back to 7.0.7 the link test works correctly. I also noticed that the newer software would load much slower than the older software. Sometimes causeing the sm to drop when doing a link test.
Anyone else seen this?
We have same problem with our 5,7 Canopy, FW 7.1.4. I do not know if it is caused by 7.1.4 firmware in AP od SMs.
This is a known issue when running the AP’s on one load while the SM is on another. (one running 7.1.4 while the other runs 7.0.7)
This issue will be fixed in 7.2.