# Cambium Newbie Question PTP

**URL:** <https://community.cambiumnetworks.com/t/cambium-newbie-question-ptp/60024>\
**Category:** ePMP\
**Created:** [January 30, 2019, 4:08pm UTC](https://community.cambiumnetworks.com/t/cambium-newbie-question-ptp/60024 "2019-01-30T16:08:17Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Chris\_Fikert](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/c/87869e/32.png) [@Chris\_Fikert](https://community.cambiumnetworks.com/u/Chris_Fikert)\
**Post date:** [January 30, 2019, 6:04pm UTC](https://community.cambiumnetworks.com/t/cambium-newbie-question-ptp/60024/2 "2019-01-30T18:04:10Z")

</div>

Hello and welcome!&nbsp; There is an abundance of information available on this community, as well as, the KB, webinar archive, Cambium College and YouTube channel.&nbsp; I'll post some links at the end of this post that may help in the future.

As for your specific question, I would highly recommend using our free [LINKPlanner](https://support.cambiumnetworks.com/files/linkplanner/) design tool ([overview video](https://www.youtube.com/watch?v=zKKR8ek36hE)) to estimate out performance using various products.&nbsp; In general, you are probably looking at an [ePMP PTP](https://www.cambiumnetworks.com/products/backhaul/) design (bridge in a box, Force180/190/200/300).&nbsp; Throughput is going to be heavily dependent on channel size and SNR.&nbsp; A 40MHz wide channel will give you ~250Mbps of aggregate (downlink and uplink) capacity, whereas an 80MHz wide channel will be closer to 600Mbps).&nbsp; These numbers assume a clean channel and the Force180/190/200 support up to 40MHz wide channels (Force300 up to 80MHz).

Another low cost option is the [PTP550](https://www.cambiumnetworks.com/products/backhaul/ptp-550/).&nbsp; It actually has 2 radios inside of it, capable of 80MHz wide channels each, for a total headline rate of 1.3Gbps+.&nbsp; With the asymmetrically, non-contiguous channel bonding feature, you can select any combination of channel sizes for the two radios (e.g. 2x20MHz, 1x20MHz and 1x80MHz, etc.).&nbsp; This gives you flexibility in channel and frequency band selection.&nbsp; You can use two 20MHz wide channels now and increase the channel size as your throughput requirements change.&nbsp; Also, the multiple channels will give you better interference mitigation should the spectrum become congested (the radio will change channels to avoid interference).

Here are some useful links:

Corporate Page: [http://www.cambiumnetworks.com/](http://www.cambiumnetworks.com/)

Main Support Site: [https://support.cambiumnetworks.com/](https://support.cambiumnetworks.com/)

Support Community: http://community.cambiumnetworks.com/

cnMaestro Network Management: [https://cloud.cambiumnetworks.com/](https://cloud.cambiumnetworks.com/)

Webinar Archive: [http://community.cambiumnetworks.com/t5/Webinar-Archive/Webinar-Archive/m-p/46088#M77](https://community.cambiumnetworks.com/t/webinar-archive/42455)

YouTube Page: [https://www.youtube.com/user/CambiumNetworksLtd](https://www.youtube.com/user/CambiumNetworksLtd)

Cambium College: [http://community.cambiumnetworks.com/t5/Cambium-College/Cambium-College/m-p/69663#U69663](https://community.cambiumnetworks.com/t5/Cambium-College/Cambium-College/m-p/69663#U69663)

Technical Training: [https://www.cambiumnetworks.com/training-overview/](https://www.cambiumnetworks.com/training-overview/)

LINKPlanner webinar: [https://www.youtube.com/watch?v=zKKR8ek36hE](https://na01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DzKKR8ek36hE&data=02%7C01%7CChris.Fikert%40cambiumnetworks.com%7C23c6fd0051814851fb1b08d634a7ef9b%7C0e263e36340946228ac818d993e76eb6%7C0%7C0%7C636754293218364530&sdata=q1QwxGaIjCAm2avU3KVhzY0w17zsPkRE6QBdDnhs21k%3D&reserved=0)

---

_[View the full topic](https://community.cambiumnetworks.com/t/cambium-newbie-question-ptp/60024)._
