Can the Ethernet interface on ePMP be configured to either Auto-negotiate or Manual?

Answer: The ePMP device may be configured for Manual Ethernet port speed configuration or Auto-negotiation.

AP 

These configuration parameters may be found at Configuration > Network

Ethernet Port Configuration

Manual: The LAN Ethernet port speed and duplex mode can be manually configured.

Auto-Negotiate: The AP auto negotiates the LAN Ethernet port speed and duplex mode with the device connected to it.

Port Speed

With “Ethernet Port Configuration” the LAN Ethernet port speed can be forced to 1000 Mbps, 100 Mbps or 10 Mbps.

Port Duplex Mode

With “Ethernet Port Configuration” the LAN Ethernet port duplex mode can be forced into Full or Half.

SM

These configuration parameters may be found at Configuration > Network

Ethernet Port Configuration

Manual: The LAN Ethernet port speed and duplex mode can be manually configured.

Auto-negotiate: The SM auto negotiates the LAN Ethernet port speed and duplex mode with the device connected to it.

Port Speed

With “Ethernet Port Configuration” set to Manual, the LAN Ethernet port speed can be forced to 1000 Mbps (only GPS Synchronized radio), 100 Mbps or 10 Mbps.

Port Duplex Mode

With “Ethernet Port Configuration” set to Manual, the LAN Ethernet port duplex mode can be forced to Full or Half.