# Cn wave node offline

**URL:** <https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103>\
**Category:** cnWave 60 GHz\
**Created:** [September 2, 2022, 10:04pm UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103 "2022-09-02T22:04:55Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mk\_mohamed](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/m/858c86/32.png) [@Mk\_mohamed](https://community.cambiumnetworks.com/u/Mk_mohamed)\
**Post date:** [September 2, 2022, 10:04pm UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103/1 "2022-09-02T22:04:55Z")

</div>

Hi all

i facing Problem with Cn wave Proudect and

 ![chrome_d3DzdVrJMc](https://d1okf4ta8xniw3.cloudfront.net/original/3X/6/e/6e0eec76269803dab42df5cb11db1accfbe0a52e.png)  
this is the closest thread to my problem.

Simple lab setup:

1. v5k configured as PoP DN with on-board E2E
2. v3000 configured as CN
3. v5k status is online initiator
4. A link is established between the v5k and v3000

Layer 2 bridging is on

My issue is that I cannot get the v3000 to show up as ‘online’, always in ‘offline’ state. .

Please take in your account i read this topic about same Problem and i didnt know How i correct the IPV6

Thank you in advance

---

<div class="post-metadata">

**Author:** ![James\_Mifsud](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/james_mifsud/32/25586_2.png) [@James\_Mifsud](https://community.cambiumnetworks.com/u/James_Mifsud)\
**Post date:** [September 3, 2022, 7:02am UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103/2 "2022-09-03T07:02:54Z")

</div>

Hello,

Are you indoors? As you said, this was a Lab Install.

Thanks

---

<div class="post-metadata">

**Author:** ![Mk\_mohamed](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/m/858c86/32.png) [@Mk\_mohamed](https://community.cambiumnetworks.com/u/Mk_mohamed)\
**Post date:** [September 3, 2022, 11:33am UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103/3 "2022-09-03T11:33:28Z")

</div>

Hi  
no its outdoor installtion

---

<div class="post-metadata">

**Author:** ![Mk\_mohamed](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/m/858c86/32.png) [@Mk\_mohamed](https://community.cambiumnetworks.com/u/Mk_mohamed)\
**Post date:** [September 3, 2022, 11:37am UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103/4 "2022-09-03T11:37:23Z")

</div>

[da\_logs\_883df4\_1662205014711.txt](https://community.cambiumnetworks.com/uploads/short-url/kAZA8uwhxO9K7wBTUDtQqtVx6jN.txt) (15.8 KB)

---

<div class="post-metadata">

**Author:** ![James\_Mifsud](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/james_mifsud/32/25586_2.png) [@James\_Mifsud](https://community.cambiumnetworks.com/u/James_Mifsud)\
**Post date:** [September 5, 2022, 12:53pm UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103/6 "2022-09-05T12:53:46Z")

</div>

I was just thinking about this, your post says you’ve established a link, but it’s showing offline status;

> [@Mk\_mohamed](#):
>
> A link is established between the v5k and v3000

This sounds like a IPv6 routing issue between the E2E and the remote node

---

<div class="post-metadata">

**Author:** ![Prasanna\_TM](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/prasanna_tm/32/23000_2.png) [@Prasanna\_TM](https://community.cambiumnetworks.com/u/Prasanna_TM)\
**Post date:** [September 6, 2022, 5:41am UTC](https://community.cambiumnetworks.com/t/cn-wave-node-offline/88103/7 "2022-09-06T05:41:43Z")

</div>

Hi Mk\_mohamed,

I need field diagnostic of V5000 and V3000 to share more comments.

please refer below link that would assist you

> [@Download Field Diags of 60 GHz cnWave device and E2E Controller Tech Support dump in cnMaestro](https://community.cambiumnetworks.com/t/77510):
>
> This article explains how to download Field Diags file of 60 GHz cnWave device and E2E Controller Tech Support dump file in cnMaestro Download 60 GHz cnWave Device Tech Support file (Field Diagnostics file) Navigate to E2E Network \> Site \> 60 GHz cnWave device Click on 60 GHz cnWave device \> Tools \> Status and click on Spanner icon to download Tech Support file Info window pops up says " File download process initiated. This may take few minutes, if not su…

Thankyou
