cnMaestro 6.0 On-prem on Sangfor HCI

[Alex_B]

cnMaestro X On-Premises on Sangfor HCI - Black screen after boot

[Mega-NET]

Same thing with Proxmox 9.2.20, first boot ok, but after black screen. The system works, just dont have any output in console.

[StephenP (Steve P)]

Try doing the grub edits mentioned in this post…

cnMaestro 6.0 On-prem on Hyper-V

cnMaestro On-Prem definitely works with Hyper-V, but is a bit of a pain to get going as Cambium’s default mount points are not very robust, causing the drive order to slip sometimes between reboots. And on 6.0.0, the Hyper-V console will dump to a black screen with Cambium’s default grub config. Here are some old partial notes, should at least give you a starting point. Convert disk image format from VMware .vmdk to Hyper-V .vhdx Download and install QEMU for Windows ( need to use qemu-img.e…

[Alex_B]

Solved with this edit: “GRUB_CMDLINE_LINUX_DEFAULT=”“”

[ortasim]

cnMaestro Self Hosting Survival Guide | Simon S. posted on the topic | LinkedIn

You might want to check Simons guide about configuring partitions.