# cnMaestro On-Premises version 6.0.0 fully supports PMP450v radios

**URL:** https://community.cambiumnetworks.com/t/cnmaestro-on-premises-version-6-0-0-fully-supports-pmp450v-radios/108656
**Category:** cnMaestro
**Created:** [July 23, 2026, 6:50pm UTC](https://community.cambiumnetworks.com/t/cnmaestro-on-premises-version-6-0-0-fully-supports-pmp450v-radios/108656 "2026-07-23T18:50:03Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![Cambium\_Lena](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/c/a183cd/32.png) [@Cambium\_Lena](https://community.cambiumnetworks.com/u/Cambium_Lena)
#### Post date: [July 23, 2026, 6:50pm UTC](https://community.cambiumnetworks.com/t/cnmaestro-on-premises-version-6-0-0-fully-supports-pmp450v-radios/108656/1 "2026-07-23T18:50:03Z")

</div>

With the [release of cnMaestro On-Premises version 6.0.0](https://community.cambiumnetworks.com/t/cnmaestro-on-premises-6-0-0-release/108620/), Cambium now has an On-Premises Maestro release that fully supports multiple component carriers for 450v radios, bringing it inline with the current cloud software. While prior On-Premises version had basic 450v support for upgrades, single component carrier statistics, etc, this version supports statistics, dashboard, etc, for up to 3 component carriers.

Here is an excerpt from page 17 of [the cnMaestro release notes](https://support.cambiumnetworks.com/files/cnmaestro/):

## Multiple Component Carriers Support in PMP 450v

cnMaestro now supports displaying **Multiple Component Carriers** for the PMP 450v platform across various dashboards and views.

The **Access Point (AP)** and **Subscriber Module (SM)** can use multiple component carriers simultaneously. The **4×4 PMP 450v** supports up to **four component carriers** , each up to **40 MHz wide** , providing flexibility to adapt to available spectrum in different coverage areas. The 450v is available in both a **4×4 AP** and a **4×4 SM**. These radios support multiple carriers (two 2×2 carriers), enabling placement of four component carriers.

For a detailed explanation of the difference between **Carriers** and **Component Carriers** , refer to **Chapter 1: Configuring Radio Parameters** in the _PMP/PTP 450 Series Configuration_  
_Guide_

Note: This enhancement is supported by the PMP 450v devices running version 24.2 and above.

**Enhancements include:**

- **PMP 450v 4×4 AP**
  - Dashboard \> Access Point Details section
  - Dashboard \> Frame Utilization Graph
  - Dashboard \> Radio Details  
 ![image](https://d1okf4ta8xniw3.cloudfront.net/original/3X/c/c/cc7a94b502a37f902e7a1c3971d2074fdbee7815.jpeg)  
 ![image](https://d1okf4ta8xniw3.cloudfront.net/original/3X/1/a/1ae05b4170342a54dda7a743870ffce11212fbcb.jpeg)
  - Details \> Overview \> Wireless section
  - SMs tab  
 ![image](https://d1okf4ta8xniw3.cloudfront.net/original/3X/d/a/da28886ca0a9210171a83294c589c6032da9c06e.png)
  - Performance tab \> Frame Utilization—Downlink and Uplink graphs

- **PMP 450v 4×4 SM / PMP 450v 2×2 SM**
  - Dashboard \> Radio Details  
 ![image](https://d1okf4ta8xniw3.cloudfront.net/original/3X/1/b/1b3de69d3c8ae0f31779dd9c2ad4e491d534b77a.jpeg)
  - Details \> Overview \> Wireless section
  - Performance tab \> Frame Utilization—Downlink and Uplink graphs
  - Performance tab \> DL RSSI Imbalance, Modulation (Downlink/Uplink), BER Path A, BER Path B graphs

- **Additional Views**
  - Tower Dashboard \> Device Status \> Frequency
  - Network Services \> Spectrum Analyzer \> Frequency
  - Map \> Details \> Frequency