Ever have a need to configure local DHCP for ePMP SMs? If so, take a look at the following article written by Ikram Mujtaba from the Cambium Technical Support team.
Summary:
This article describes on how to enable DHCP server on ePMP devices for the clients connected below the SM ethernet interface. This would avoid use of external DHCP server.
Products:
ePMP 1000, Force 100/110/130/180/190/200/300(All series) and ePMP Elevate
Solution:
This option is available on the Subscriber Module only in NAT or Router mode and acts as a DHCP server for the devices associated to its ethernet interface.
DHCP Server Enabled: Use this setting when SM is in NAT or Ro…