I have set up a small canopy test network in my office in a triangular shape. At the top of the triangle is the 2450AP (IP 169.254.1.1) connected to a 3com switch. On the right corner I have 2450SM (IP 169.254.1.2) connected to my laptop (IP 169.254.1.50). On the left corner I have th 2400SM (IP 169.254.1.3) connected an ip camera (IP 169.254.1.100). From my laptop I can access the home page of the 2450AP and ping the device. I cannot open a web page for the AP located on the left corner of the triangle or ping the 2400SM. I can however open a web page for the camera and see video in real time and ping the camera. Can anyone provide some insight? Thank you in advance.
Post the IP addresses of the Canopy gear as well as the IP of your laptop and the IP Camera.
cusanom wrote: ..can not ping the 2400SM. I can however open a web page for the camera and see video in real time and ping the camera. Can anyone provide some insight? Thank you in advance.
Try change in 2400SM IP configuration, set to Public
regards,
mrdlnf