# Default Access Parameters (IP address, login etc)

**URL:** https://community.cambiumnetworks.com/t/default-access-parameters-ip-address-login-etc/43549
**Category:** Enterprise Wi-Fi Networks
**Tags:** knowledge-base
**Created:** [January 26, 2016, 10:52am UTC](https://community.cambiumnetworks.com/t/default-access-parameters-ip-address-login-etc/43549 "2016-01-26T10:52:40Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![firefly](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/firefly/32/12254_2.png) [@firefly](https://community.cambiumnetworks.com/u/firefly)
#### Post date: [January 26, 2016, 10:52am UTC](https://community.cambiumnetworks.com/t/default-access-parameters-ip-address-login-etc/43549/1 "2016-01-26T10:52:40Z")

</div>

**Default IP address** :

ePMP 1000 Hotspot : 192.168.0.2

cnPilot E400 : 192.168.0.1

**Login:**

Username: admin

Password: &nbsp;admin

**Command Line Access:**

Telnet: Disabled by default

SSH: Enabled by default (on standard port: 22)

**Web GUI Access** :

HTTP: Enabled by default

HTTPS: Enabled by default

**SNMP:**

V2C Community Strings: &nbsp;public, private

**Change Settings:**

Various access parameters can be configured (enabled/disabled) from the CLI under 'management':

test-E400(config)# management

&nbsp; cambium-remote &nbsp; &nbsp; &nbsp; : Enable Cambium remote management of this device

&nbsp; http &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; : Enable http server

&nbsp; https&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; : Enable https server

&nbsp; ssh&nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; : Enable ssh server

&nbsp; telnet &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; : Enable telnet server

&nbsp; user &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; &nbsp; : Users that will login to the device

&nbsp;cnWest-E400(config)# management

&nbsp;

To Disable, use 'no' form of the CLI commands, for instance to disable&nbsp;telnet: 'no management telnet'.

&nbsp;

To &nbsp;Change password: 'management user admin password newpassword'

&nbsp;

On&nbsp;the device GUI, all of this is configurable under:

&nbsp; **Configuration-\>System** (Management subsection)

&nbsp;