# Default Access Parameters

**URL:** https://community.cambiumnetworks.com/t/default-access-parameters/43737
**Category:** Residential Wi-Fi
**Tags:** knowledge-base
**Created:** [February 4, 2016, 3:48pm UTC](https://community.cambiumnetworks.com/t/default-access-parameters/43737 "2016-02-04T15:48:27Z")
**Posts on this page:** 1
**Page:** 1

<div class="post-metadata">

### Author: ![chandrasharma](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/c/6bbea6/32.png) [@chandrasharma](https://community.cambiumnetworks.com/u/chandrasharma)
#### Post date: [February 4, 2016, 3:48pm UTC](https://community.cambiumnetworks.com/t/default-access-parameters/43737/1 "2016-02-04T15:48:27Z")

</div>

**Default IP address** :

cnPilot R200/200P&nbsp; : 192.168.11.1

cnPilot R201/201P&nbsp; : 192.168.11.1

cnPilot R201W&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;&nbsp;&nbsp; : 192.168.11.1

**Login:**

Username&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : admin

Password&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : admin

**Command Line Access:**

Telnet&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Disabled by default, need to be enabled from Web UI.

SSH&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Not supported.

**Web GUI Access:**

HTTP&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Enabled by default

HTTPS&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Enabled by default

**Default SSID and Password:**

&nbsp;  
**Default SSID's in 2.4/5 GHz**

CAMBIUM\_2.4GHz\_MACAddress   
CAMBIUM\_5GHz\_MACAddress

**Default Secuity / Password:**

WPA2-PSK-AES / 12345678

**Default Radio Status:**

ON , default SSID will be broadcasted.

**S**** NMP:**

V2C Community Strings: &nbsp;public, private

**Change Settings:**

Various access parameters can be configured from Web UI under “Administration” Section.

Administration -\>cnMaestro&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : To Enable Cambium remote management of this device

Administration -\>Management&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; &nbsp;: Following access parameters can be configured from Management section

&nbsp;Password Reset&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Password can be changed for different user type.

Web Access&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Web access can be enabled/disabled and Web Port changes.&nbsp;&nbsp;&nbsp;&nbsp;

&nbsp;Telnet Access&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Enable Telnet, change port no and configure Allowed IP range.

Syslog Settings&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; : Syslog enabled by default, we can enable Remote Syslog.