# Default password to log into r200-p

**URL:** <https://community.cambiumnetworks.com/t/default-password-to-log-into-r200-p/44987>\
**Category:** Residential Wi-Fi\
**Created:** [April 12, 2016, 2:24pm UTC](https://community.cambiumnetworks.com/t/default-password-to-log-into-r200-p/44987 "2016-04-12T14:24:21Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![firefly](https://d10gw3vjmzyp8.cloudfront.net/user_avatar/community.cambiumnetworks.com/firefly/32/12254_2.png) [@firefly](https://community.cambiumnetworks.com/u/firefly)\
**Post date:** [December 13, 2016, 4:11am UTC](https://community.cambiumnetworks.com/t/default-password-to-log-into-r200-p/44987/9 "2016-12-13T04:11:29Z")

</div>

> * * *
> [@AREJAY](https://community.cambiumnetworks.com/u/AREJAY/summary) wrote:  
> 
> what username and passwords do i use if the admin/admin do not work
> 
> * * *

try connecting wirelessly to it in case the SSID and passphrase are still default. Details here:

[http://community.cambiumnetworks.com/t5/cnPilot-R-series-R201-R201P/Default-Access-Parameters/td-p/49532](https://community.cambiumnetworks.com/t/default-access-parameters/43737)

or, if your AP is onboarded into cnMaestro you can configure/reconfigure through cnMaestro (& reset the password to something known). If it is not been onboarded until now, you could still do it into your account by&nbsp;using the&nbsp;serial number printed on the unit (assuming cnMaestro onboarding is still enabled in its config).

Lastly&nbsp;you can&nbsp;factory-default it (using the reset pin). Config would be lost, but the device will again be reachable using admin/admin

[http://community.cambiumnetworks.com/t5/cnPilot-R-series-R201-R201P/Resetting-R200-R201-to-factory-default-Hard-Reset/m-p/49765#U49765](https://community.cambiumnetworks.com/t/resetting-r200-r201-to-factory-default-hard-reset/43835)

---

_[View the full topic](https://community.cambiumnetworks.com/t/default-password-to-log-into-r200-p/44987)._