# Elevated NanoStation (NSM5) on ePMP AP \> 3.5.2

**URL:** <https://community.cambiumnetworks.com/t/elevated-nanostation-nsm5-on-epmp-ap-3-5-2/81405>\
**Category:** ePMP\
**Created:** [September 29, 2021, 8:55am UTC](https://community.cambiumnetworks.com/t/elevated-nanostation-nsm5-on-epmp-ap-3-5-2/81405 "2021-09-29T08:55:56Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lightnet\_Barry](https://d10gw3vjmzyp8.cloudfront.net/letter_avatar_proxy/v4/letter/l/b19c9b/32.png) [@Lightnet\_Barry](https://community.cambiumnetworks.com/u/Lightnet_Barry)\
**Post date:** [September 29, 2021, 8:55am UTC](https://community.cambiumnetworks.com/t/elevated-nanostation-nsm5-on-epmp-ap-3-5-2/81405/1 "2021-09-29T08:55:56Z")

</div>

Hi,

Can anyone confirm if it is possible to connect an elevated nanostation to an AP running v4 firmware.

Everytime we do so, the CPEs fail to re-associate (not quite 100% but someone may have mislabelled those). The nanos take the firmware without issue but will not connect. Naobeams etc all connect without issue as obviously do Force 180, 200, etc.

I am certain I read somewhere that there was a compatability issue but I cannot find the reference.

Thanks,  
Barry
