# Enterprise Wi-Fi System Software Release - 6.4.2
**URL:** https://community.cambiumnetworks.com/t/enterprise-wi-fi-system-software-release-6-4-2/87229
**Category:** Enterprise Wi-Fi Networks
**Tags:** release-notes
**Created:** [July 21, 2022, 11:12am UTC](https://community.cambiumnetworks.com/t/enterprise-wi-fi-system-software-release-6-4-2/87229 "2022-07-21T11:12:52Z")
**Posts on this page:** 2
**Page:** 1
### Author:  [@CAM\_TSK](https://community.cambiumnetworks.com/u/CAM_TSK)
#### Post date: [July 21, 2022, 11:12am UTC](https://community.cambiumnetworks.com/t/enterprise-wi-fi-system-software-release-6-4-2/87229/1 "2022-07-21T11:12:52Z")
Software release 6.4.2 is available for Enterprise Wi-Fi. 6.4.2 software release contains features, enhancements and bug fixes. Following are the downloads available for software release 6.4.2:
- [Documentation](https://support.cambiumnetworks.com/files/wifi6_docs/)
- [XV2-2\_XV2-2T0\_XV2-2T1\_XE3-4](https://support.cambiumnetworks.com/files/wifi6_xv2_2/)
- [XV3-8\_XE5-8](https://support.cambiumnetworks.com/files/wifi6_xv3_8/)
- [e410\_e510\_e430\_e600\_e700](https://support.cambiumnetworks.com/files/e410/)
- [Antenna Patterns](https://support.cambiumnetworks.com/files/wifi6_antenna/)
# New Features
## Auto-RF
With the Auto-RF feature, AP collects a number of RF-statistics and uses that information to give a better Radio Frequency (RF) environment to wireless clients, by selecting the right channel and Tx power for each radio. This results in a better end-user experience in terms of application performance and call quality.
Auto-RF consists of two functionalities:
- Dynamic channel: Helps radios to always select a better channel at boot time and post boot if channel conditions change later.
- Auto power: Helps radios to come up with the right Tx power to handle coverage holes and minimize RF interference.
## Device class filter
This feature applies wireless policies to the client-based device class (notebook, phone, tablet, and laptop) and its type (Windows, Mac, and Android).
## Flooding attacks in Wireless Intrusion Detection Systems (WIDS)
The WIDS feature is used to detect different types of flood attacks. A flood attack occurs when a rogue client sends a huge number of packets of a specific type to the AP to disrupt the normal working of the AP. This feature can detect the following types of flood attacks:
- Association
- Authentication
- Disassociation
- De-authentication
- Extensible Authentication Protocol over LAN (EAPoL)
## Opportunistic Wireless Encryption (OWE)
OWE is a Wi-Fi standard, which ensures that the communication between each pair of endpoints is protected from other endpoints. The OWE transition mode allows OWE-capable STAs to access the network in OWE authentication mode.
# Enhancements
## Scale Limit: 2K ePSK
From System Release 6.4.2 onwards, Enterprise Wi-Fi 6 XV series Access Points support 2K ePSK entries per WLAN. Other Access Points (e410, e430, e510, e600, and e700) continue to support 1024 ePSK entries per WLAN.
# Fixed Issues
| Tracking ID | Product | Description |
| --- | --- | --- |
| FLCN-12500 | All | Sanitize ping host argument was found in device-agent. |
| FLCN-12424 | e410, e510, e430, e600, and e700 | Clients disconnection triggered due to related process restarts. |
| FLCN-12364 | XE3-4 | Fixed memory leak. |
| FLCN-12362 | All | cnMaestro Captive Portal: cnMaestro dynamic IP address was not learned when the TTL value is 0. |
| FLCN-12327 | XV2-2, XV2-2T0, and XV2-2T1 | DFS channels are missing from the KR country code. |
| FLCN-12254 | All | Issue with the captive portal white list entries which caused the client not to get a login page from the external captive portal server. |
| FLCN-12252 | All | Number of VLANs supported on device was increased. |
| FLCN-12184 | All | Unable to save SSH key in APs UI- Error: specified parameter greater than the maximum length. |
| FLCN-12130 | All | Real clients in the field are failing to connect to WPA3-Enterprise security because of SuiteB AKM. |
| FLCN-12129 | All | AP generated PPPoE Tunnel Critical alarm with a 6.4.1-r15 image even if the PPPoE feature was not configured. |
| FLCN-12120 | XV3-8, and XE5-8 | Removed 160 MHz configuration from unsupported radio channel- width list. |
| FLCN-12119 | All | WPA2-Enterprise clients get reauthenticated every 1 hour. |
| FLCN-12113 | All | AP running with 6.4.1 image reported frequent WMD restarts which caused clients to disconnect. |
| FLCN-12080 | XV2-2 | AP crashed due to a watchdog reset. |
| FLCN-12038 | e410, e510, e430, e600, and e700 | Link Aggregation Control Protocol (LACP) was not working. |
| FLCN-11997 | All | GRE tunnel down event was generated without checking the reachability to peer after the Rx counter did not increment for two consecutive intervals. |
| FLCN-11986 | All | Secondary-remote-host tunnel IP was not getting applied if pushed from user-defined overrides. |
| FLCN-11975 | All | False event EOGRE tunnel up was triggered even if the tunnel was down. |
| FLCN-11820 | e410, e510, e430, e600, and e700 | Multicast-to-unicast conversion was not working. |
| FLCN-11761 | All | Fixed issues related to band-steering. |
| FLCN-11653 | All | Pixel 6 was not able to connect to a WPA3-SAE WLAN on the 6 GHz radio. |
| FLCN-11578 | e410,e510, e430,e600, and e700 | Off-Channel Scan (both active and passive scan) was finding Clients and Neighbor APs only in home channel APs. |
| FLCN-11299 | All | Azure prompted for re-authentication when roaming from an AOS to CaOS AP. |
| FLCN-11173 | All | AP dropped DNS AAAA inquiry. |
| FLCN-8612 | All | ePSK VLAN was not honored after 11r roaming. |
---
### Author:  [@Space](https://community.cambiumnetworks.com/u/Space)
#### Post date: [November 20, 2022, 6:11pm UTC](https://community.cambiumnetworks.com/t/enterprise-wi-fi-system-software-release-6-4-2/87229/2 "2022-11-20T18:11:31Z")
Hi. I’m running 6.4.2.1-r1 on a XE3-4 and have one iot device that couldn’t stay connected. It was connecting and disconnecting every second. So after some testing I found out that “ Proxy ARP” setting under Configure → WLAN was the problem. I disabled this and now it’s stable and working. So if anyone else is experiencing a similar issue maybe this solves it.
Edit: I’m using Device Login management (Local).