Epmp 1000/180

[Luca_Leonelli]

Dopo aver installato la versione 5.10.1 l: antenna epmp 1000/180 non funziona

[aka (Andrii)]

Hello Luca,

did you try to push it through a recovery procedure?
How did you upgrade it: on a bench or in a field? Did you use cnMaestro?

Recovery of flash corrupted 802.11n-based ePMP devices caused due to power interruption during a software upgrade

This topic describes the recovery procedure for ePMP1000/F180/F200/F190 devices. For ePMP3000, ePMP3000L, ePMP 3000MP and F300 devices, please see this newer article. Problem Statement: All ePMP radios, except the Connectorized Radios with Sync, have a single flash bank. There is a high probability that the flash bank can get corrupted when power to the radio is interrupted during a flash write, i.e. software upgrade. This is not an issue with the Sync radio since there are two flash banks i…

[Luca_Leonelli]

Ciao Andrii,

Avevo aggiornato le antenne sul campo, comunque sono riuscito a pingare le antenne con l’indirizzo ip originale e riuscire a sbloccare l’antenna.

Grazie mille per l’aiuto.

Luca