ePMP 1000 Connectorized TX power AP vs SM

Products ePMP
1

I have a link between an AP and single SM both have Force110 dish. The AP won't let me set TX power above 23 but the SM can be set to 30. Freq 5795 20MHz FCC. FW Ver. 2.6.2 on both.

Question: Can I set TX power higher if AP is set to different mode? ie.. PTP instead of AP

2

Hi,

Yes, you can get higher Tx Power in PTP mode.

For PMP Conducted Power limit is 23 dBm and for PTP 30 dBm.

Thank you.