epmp clip/lens/stinger

We have had better operation with our integrated cpe units than our connectorized unit with different antenna options. With that being said is there a plan or will there be an option for an epmp clip/lens/stinger. we loved them with out sm100 units.

Yes, some kind of antenna that is not a large dish would be great…

1 Like

We have a reflector dish for our our Integrated ePMP radios. You can find out the details here: http://www.cambiumnetworks.com/spec-sheets/epmp_reflector_dish

For our connectorized ePMP radios we have an antenna we call “Force 100” You can find out about the Force 100 here: http://www.cambiumnetworks.com/spec-sheets/epmp_force100_specs

To keep abreast of ePMP accessories keep an eye on our ePMP product page here: http://www.cambiumnetworks.com/products/epmp (Brochures and Antenna Specs are along the right-hand side of the web-page.)

The Force 100 is a pain to put together with the feed horn not wanting to go in all the way. One could easily break the horn because it is half plastic and half metal. After I have installed what I have of them, I’ll check out the force 110.

Any chance of having a "CLIP" for epmp SM?  

Offset reflector is very cumbersome.

Yes, something like a Stinger, or a dish/reflector that is less cumbersome. 

A bigger sized/gain panel is missing. Something like MT QRT with better shielding. 23db helps a lot getting higher modulations.

its a split antenna design inside of the CPE, it uses nearly the entire face of the CPE for both antennas. 

plenty of low cost dual pol antennas out there that can work with the EPMP

for example


1 Like

epmp force 110 is nice