Supported Platforms ePMP AX Platforms ePMP AC Platforms ePMP N Platforms Download the firmware and documentation from: Force300-13L, Force300-25L Force300 ePMP 3000, ePMP 3000L ePMP 4xxx, Force4xxx ePMP 1000/2000 ePMP 1000 Force 100/110/180/190/200 SM ePMP Elevate Force 130 ePMP WOM Features de…

This feature can only be enabled on e4k AP’s.

PPPoE seems to be broken in 5.10.0 (on AX, I haven’t confirmed whether or not AC is affected yet). If the PPPoE session drops, it doesn’t seem to ever re-connect. I confirmed 5.10.0-RC36 also does this, but it looks like RC35 might not be affected (most of the 5.10.0 final and RC36 clients on the AP…

Asymmetric Uplink Bandwidth Support The Asymmetric Uplink Bandwidth feature is introduced for ePMP 4xxx/Force 4xxx and ePMP 3xxx/Force 3xx devices

Unfortunately, the release notes don’t provide full clarity. The asymmetric feature can only be enabled on e4k AP’s. e3k SM’s connecting to an e4k AP using backwards compatibility mode that have asymmetric feature enabled will ONLY connect at the full channel width… NOT at the reduced uplink channel…

So, unless I’m doing something wrong - we have a Backhaul using a Force300 Master to a Force300 Slave which we’re trying 5.10.0 on, and it seems like we need to have ‘Backwards Compatibility’ turned on in the AP configuration for a Force 300 to communicate with a Force 300? It appears that if we don…

This will be a poor report (I won’t be able to download or send in the tech support files) but in our graphs, I’m seeing outages on our Force 400c link with 5.10.0, and the link uptimes show that the link is disconnecting occasionally (Gap dropping to Zero at 19:40). FWIW, this 400c link had it’s Sp…

This problem for the 400C device in each new firmware, after the test, you have to roll back to version 5.4.2 where the work is stable, the data provided support, but all the conversations ended in that we have problems in our network, after such statements I stopped with them, but only I observe ho…

[image] ninedd: Is this behavior as expected? Hi @ninedd , thank you very much for reporting this! It is a bug. We will fix it asap.

Last night we updated our Cambium 4625 point-to-point backbone links to the new 5.10.0 firmware (April release), and the results were disastrous.Before the update, the links were performing normally with local ping latencies of around ~0.5 ms and a link capacity close to 900 Mbps.After updating to 5…

Hi @Luis_Espinel , by any chance did you grab tchsupport files while on 5.10.0? Do you run any kind of MPLS, VPLS, EoIP or any other kind of traffic adding overhead? In general I have positive reports regarding 5.10.0 release. But sometimes it does not work for some costumers. I would like to inv…

Cambium Community

ePMP Software Release 5.10.0 is now available

Products ePMP

release-notes

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled