Hi
Has anyone updated a PTP450 to 15.1.5? i upgraded a link today and got the following error.
Error: FPGA compiled only as SM. Please upgrade to system version.
any ideas and what might cause this?
Thanks
Hi
Has anyone updated a PTP450 to 15.1.5? i upgraded a link today and got the following error.
Error: FPGA compiled only as SM. Please upgrade to system version.
any ideas and what might cause this?
Thanks
It looks to be a bug with cnmeastro identifying the BH as an SM and writing the incorrect FPGA to the module
FPGA version after cnMaestro update.
fpgainfo
FPGA Images: 1
Version Attribute Start End CRCHi CRCLo
canopy_450sm_171115_055759.rbf 00009084 175B 24FB DBDE 5060 <--Boot Image
Bank 1 (0x4300)
Image: .SVM;15.SVm;1_3.SVB;official.SVW;F.IT;CC120_OFDM.SVT;22:34.SVD;01/18/2018.
Length: 00580000 CRC: AC146253
FPGA Images: 1
Version Attribute Start End CRCHi CRCLo
canopy_450sm_171115_055759.rbf 00009084 4B5B 58FB DBDE 5060 <--Boot Image
After using CNUT
Telnet+> fpgainfo
Current Boot Bank: 0
Bank 0 (0xf00)
Image: .SVM;15.SVm;1_5.SVB;official.SVW;F.IT;C120_PTP450.SVT;19:17.SVD;04/30/2018.
Length: 00582000 CRC: C8BA9F25
FPGA Images: 1
Version Attribute Start End CRCHi CRCLo
canopy_450bh_171115_055752.rbf 00409484 1761 2501 AA7A E251 <--Boot Image
Bank 1 (0x4300)
Image: .SVM;15.SVm;1_5.SVB;official.SVW;F.IT;C120_PTP450.SVT;19:17.SVD;04/30/2018.
Length: 00582000 CRC: C8BA9F25
FPGA Images: 1
Version Attribute Start End CRCHi CRCLo
canopy_450bh_171115_055752.rbf 00409484 4B61 5901 AA7A E251 <--Boot Image
Hi jaggermifter,
Can you please send me the "engineering.cgi" file of the BH to balaji.grandhi@cambiumnetworks.com.
Thanks,
Balaji
We have found this problem on maestro side, it was sending wrong image to device.
We will fix with a patch release soon.
Thanks for reporting this to us.
Regards,
Rupam
I just experienced the same issue when updating a PTP450 link from 15.1.3 to 15.2 through Maestro running version 1.6.3-r15. I had to drive out to the slave end of the link and revert firmware back to 15.1.3.
Hi Everyone,
We are very sorry for not finding the issue in our test cases.
We have released a new build with the fix yesterday for On-Premises 1.6.3-r19 package and for cloud servers we update with 1.6.1-r17
Rupam