Hi, strange errors for this SM PMP 450. What is a Reset by application ( is CnMaestro)?
******System Startup****** System Reset Exception -- Reset by application Software Version : CANOPY 14.2.1 (Build 16) SM-AES Board Type : P11 Boot Bank : 0 Board Temperature : 43 C / 109 F Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module - 0a-00-3e-b2-XX-XX<br />No valid accounts configured. Using default user account FPGA Version : 061716 FPGA Features : AES, Sched; 09/26/2016 : 06:38:39 UTC : :Cal for TXCP did not complete in 2000 ms. 09/26/2016 : 06:38:39 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:38:39 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:38:41 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:38:50 UTC : :Error trimming XO. FPGA TCXO/XO compare:103264984 09/26/2016 : 06:38:59 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 06:39:22 UTC : :Error trimming XO. FPGA TCXO/XO compare:187000778 09/26/2016 : 06:39:26 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:39:26 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:39:28 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:39:37 UTC : :Error trimming XO. FPGA TCXO/XO compare:97713362 09/26/2016 : 06:39:46 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 06:40:09 UTC : :Cal for TXCP did not complete in 2000 ms. 09/26/2016 : 06:40:09 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:40:09 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:40:12 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:40:21 UTC : :Error trimming XO. FPGA TCXO/XO compare:2026085090 09/26/2016 : 06:40:30 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 06:40:53 UTC : :Error trimming XO. FPGA TCXO/XO compare:185269610 09/26/2016 : 06:40:58 UTC : :Cal for TXCP did not complete in 2000 ms. 09/26/2016 : 06:40:58 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:40:58 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:41:01 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:41:09 UTC : :Error trimming XO. FPGA TCXO/XO compare:-1779878374 09/26/2016 : 06:41:18 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 08:42:34 CEST : :Timezone set to CEST; 09/26/2016 : 17:58:10 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79999958 09/26/2016 : 22:31:03 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79993394 09/26/2016 : 23:42:34 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79993392 09/27/2016 : 00:08:01 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79993423
Hi, strange errors for this SM PMP 450. What is a Reset by application ( is CnMaestro)?
******System Startup****** System Reset Exception -- Reset by application Software Version : CANOPY 14.2.1 (Build 16) SM-AES Board Type : P11 Boot Bank : 0 Board Temperature : 43 C / 109 F Device Setting : 5.4/5.7GHz MIMO OFDM - Subscriber Module - 0a-00-3e-b2-XX-XX<br />No valid accounts configured. Using default user account FPGA Version : 061716 FPGA Features : AES, Sched; 09/26/2016 : 06:38:39 UTC : :Cal for TXCP did not complete in 2000 ms. 09/26/2016 : 06:38:39 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:38:39 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:38:41 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:38:50 UTC : :Error trimming XO. FPGA TCXO/XO compare:103264984 09/26/2016 : 06:38:59 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 06:39:22 UTC : :Error trimming XO. FPGA TCXO/XO compare:187000778 09/26/2016 : 06:39:26 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:39:26 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:39:28 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:39:37 UTC : :Error trimming XO. FPGA TCXO/XO compare:97713362 09/26/2016 : 06:39:46 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 06:40:09 UTC : :Cal for TXCP did not complete in 2000 ms. 09/26/2016 : 06:40:09 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:40:09 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:40:12 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:40:21 UTC : :Error trimming XO. FPGA TCXO/XO compare:2026085090 09/26/2016 : 06:40:30 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 06:40:53 UTC : :Error trimming XO. FPGA TCXO/XO compare:185269610 09/26/2016 : 06:40:58 UTC : :Cal for TXCP did not complete in 2000 ms. 09/26/2016 : 06:40:58 UTC : :Cal for RXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:40:58 UTC : :Cal for TXVCOCAL did not complete in 10 ms. 09/26/2016 : 06:41:01 UTC : :Cal for RFDC did not complete in 2000 ms. 09/26/2016 : 06:41:09 UTC : :Error trimming XO. FPGA TCXO/XO compare:-1779878374 09/26/2016 : 06:41:18 UTC : :InitADI936x() : RX DC calibration failure during ADI init 0x2! 09/26/2016 : 08:42:34 CEST : :Timezone set to CEST; 09/26/2016 : 17:58:10 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79999958 09/26/2016 : 22:31:03 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79993394 09/26/2016 : 23:42:34 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79993392 09/27/2016 : 00:08:01 CEST : :XO did not trim after 200 attempts. FPGA TCXO/XO compare:79993423
Please reboot the SM and if the situation persists over multiple reboots it is like a hardware failure. You should contact support and the unit should be RMA'd.