Factory default or identify IP address of cnReach device

In the event that a radio’s IP address and the serial port setting are both unknown, perform the

following steps:

  1. Open a terminal emulator program such as Terra Term, PuTTY or HyperTerminal and connect to the PC’s COM Port at 115200 8N1.
  2. Connect your serial line to serial port #1 of the radio
  3. Hit Ctrl-C when the radio is powering up.

The IP address will show on the screen. You can use the IP address to access the radio management now.

To factory default the radio:

  1. Perform Steps 1-3 above
  2. Choose option "2" to factory default the radio.
4 Likes