Summary: This article describes how to set the IP address, default gateway and DNS servers via the Command Line Interface (CLI) of the XV series AP.
-
Login to the Switch via a terminal application such as PuTTy
-
Type the following commands to set the IP address on VLAN 1. You can also create a different VLAN and set the IP address for it.
interface vlan 1
ip address <IP Address> <Subnet Mask>
exit
-
To set the Default Gateway
ip route default <IP address>
-
To set the DNS server
ip name-server <IP address>
Here is an example that configures a new VLAN, sets the IP address for that VLAN and sets the Default Gateway, DNS Server and saves the configuration to flash memory.