Hello,
At the exit, a manual way to change the logo (canopy) of SM for a logo created or changed the name of my company,
Follow the procedures did not work, ask for help for this procedure!
As I understand the manual there are two steps:
1 - put the jpg file changed within the SM with these commands:
ftp 169.254.1.1
Connected to 169.254.1.1
220 FTP server ready
Name (169.254.1.1: none): root
331 Guest login ok
Password: <password-if-configured>
230 Guest login ok, access Restrictions apply.
ftp> binary
200 Type set to I
ftp> put canopy.jpg
ftp> quit
221 Goodbye
Step 2 Delete the old logo and put the new with these commands:
>/--------- '
C A N O P Y
Motorola Broadband Wireless Technology Center
(Copyright 2001, 2002 Motorola Inc.)
Login: root
Password: <password-if-configured>
Telnet +> lsweb
Flash Web files
/ Canopy.jpg 7867
free directory entries: 31
free file space: 56 468
Telnet +> clearwebfile
Telnet +> lsweb
Flash Web files
free directory entries: 32
free file space 64336 bytes
Telnet +> addwebfile canopy.jpg
Telnet +> lsweb
Flash Web files
/ Canopy.jpg 7867
free directory entries: 31
free file space: 55 331
Telnet +> exit
I also tried repeatedly and could not get this to work with 9.5 firmware. I used the exact instructions from the PMP Solutions User Guide page 463.
EDIT: I take that back…it worked fine. The image was cached so I had to close out the web browser.